Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.tech.digital-tv,uk.tech.tv.video.pvr,uk.d-i-y
|
|||
|
|||
instant freeze after television connection
Neighbours Humax pvr 9200T freezes the television program picture about two
seconds just after the downloader program has done its job. It does exactly the same thing everytime. We have tried swithching off the power and disconnecting all the lead connections for minutes and we are no better off. I suspect it not do the recent software update that was sent out very recently. We will do this as soon as we can get some movement out of it. Since after many repeated attempts to get something to happen immediately after connecting to a television program, would anyone have any ideas on what might best be done now? Thanks for advice. |
#2
Posted to uk.tech.digital-tv,uk.tech.tv.video.pvr,uk.d-i-y
|
|||
|
|||
instant freeze after television connection
john hamilton wrote:
Neighbours Humax pvr 9200T freezes the television program picture about two seconds just after the downloader program has done its job. It does exactly the same thing everytime. We have tried swithching off the power and disconnecting all the lead connections for minutes and we are no better off. I suspect it not do the recent software update that was sent out very recently. We will do this as soon as we can get some movement out of it. Since after many repeated attempts to get something to happen immediately after connecting to a television program, would anyone have any ideas on what might best be done now? Thanks for advice. Have you tried what Humax call a default reset? (They say this will not delete any recordings). 1. Power OFF the receiver 2. Disconnect the Aerial cable 3. Power On the receiver 4. Press MENU 5. Select Installation 6. Enter your password (default = 0000) 7. Select Default Setting 8. Select YES 9. Enter your password (Default = 0000) 10. When the receiver restarts, power off 11. Connect the Aerial Cable 12. Power ON - the receiver will then search for the channels. -- Robin PM may be sent to rbw0{at}hotmail{dot}com |
#3
Posted to uk.tech.digital-tv,uk.tech.tv.video.pvr,uk.d-i-y
|
|||
|
|||
instant freeze after television connection
....snip...
Robin, you're a Top Man. We are now up and running again. Obviously we only had half the story disconnecting the leads. Many thanks. Had the same problem myself a few months ago. The key is disconnecting the aerial so it cannot find a signal and try and display pictures then crash! Then you have time to go through the menus etc. Paul DS. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Instant Fixes And Instant Cures | Electronics Repair | |||
28mm connection - hose connection | UK diy | |||
Instant, I mean instant, hot water | Home Repair | |||
anti-freeze | Home Repair | |||
Pc freeze | Electronics Repair |