Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Internal oak glazed doors
Hi,
I've been searching for the above all over and cannot seem to find anything that is not engineered or veneered! Anyone know of a good maker of solid doors which have tennon joints? tia. Stuart. |
#2
Posted to uk.d-i-y
|
|||
|
|||
Internal oak glazed doors
"srt" wrote in message
... Hi, I've been searching for the above all over and cannot seem to find anything that is not engineered or veneered! Anyone know of a good maker of solid doors which have tennon joints? Have you tried these? http://www.solidoakdoors.com/index.html You need deep pockets. Peter Crosland |
#3
Posted to uk.d-i-y
|
|||
|
|||
Internal oak glazed doors
srt wrote:
Hi, I've been searching for the above all over and cannot seem to find anything that is not engineered or veneered! Anyone know of a good maker of solid doors which have tennon joints? tia. Stuart. Cotswold doors IIRC. google em. |
#4
Posted to uk.d-i-y
|
|||
|
|||
Internal oak glazed doors
"srt" writes:
Hi, I've been searching for the above all over and cannot seem to find anything that is not engineered or veneered! Anyone know of a good maker of solid doors which have tennon joints? I had some made to measure by Parker's joinery in Cambridge. They weren't cheap, but they were not horrifyingly expensive either, and the doors are good enough that they frequently get unsolicited approbation from visitors. Not knowing where you are, I don't know whether Parker (http://www.wparkerandson.co.uk/) is near enough to you, but if it's not, you might find another joiner to make them for less than you might expect. -- Jón Fairbairn http://www.chaos.org.uk/~jf/Stuff-I-dont-want.html (updated 2009-01-31) |
#5
Posted to uk.d-i-y
|
|||
|
|||
Internal oak glazed doors
"Jon Fairbairn" wrote in message ... "srt" writes: Hi, I've been searching for the above all over and cannot seem to find anything that is not engineered or veneered! Anyone know of a good maker of solid doors which have tennon joints? I had some made to measure by Parker's joinery in Cambridge. They weren't cheap, but they were not horrifyingly expensive either, and the doors are good enough that they frequently get unsolicited approbation from visitors. Not knowing where you are, I don't know whether Parker (http://www.wparkerandson.co.uk/) is near enough to you, but if it's not, you might find another joiner to make them for less than you might expect. -- Jón Fairbairn http://www.chaos.org.uk/~jf/Stuff-I-dont-want.html (updated 2009-01-31) Thanks for the replies. I am following up on them. regards. Stuart. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Double glazed doors and catflaps | UK diy | |||
Internal doors | UK diy | |||
Double glazed doors cost | UK diy | |||
Supplier of non-standard internal glazed French doors | UK diy |