 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Bulgin Bucanner
Bought some Bulgin Buccaneer IP68 rated connectors. The chassis mount one
has a rubber gasket between it and the chassis and is secured by four screws. There are four 'top hat' bushes supplied also with the same hole size as both the fitting and gasket - but no information on how they're used. Looked at the PDF on the Rapid site - no clue there. They're not even shown. Any guesses? -- *Ah, I see the f**k-up fairy has visited us again Dave Plowman London SW To e-mail, change noise into sound. |
|
#2
Posted to uk.d-i-y
|
|||
|
|||
|
Bulgin Bucanner
On 22 Oct, 17:32, "Dave Plowman (News)" wrote:
Bought some Bulgin Buccaneer IP68 rated connectors. The chassis mount one has a rubber gasket between it and the chassis and is secured by four screws. There are four 'top hat' bushes supplied also with the same hole size as both the fitting and gasket - but no information on how they're used. Looked at the PDF on the Rapid site - no clue there. They're not even shown. Any guesses? -- *Ah, I see the f**k-up fairy has visited us again * * Dave Plowman * * * * * * * * London SW * * * * * * * * * To e-mail, change noise into sound. Bulgins own PDF refers to them as Screw sealing grommets, guess to seal under screwhead stop wicking through panel. http://www.bulgin.co.uk/PDFs/CatNo82...ndard_2005.pdf The locking rings dont survive being dropped very far... Cheers Adam |
|
#3
Posted to uk.d-i-y
|
|||
|
|||
|
Bulgin Bucanner
In article
, Adam Aglionby wrote: On 22 Oct, 17:32, "Dave Plowman (News)" wrote: Bought some Bulgin Buccaneer IP68 rated connectors. The chassis mount one has a rubber gasket between it and the chassis and is secured by four screws. There are four 'top hat' bushes supplied also with the same hole size as both the fitting and gasket - but no information on how they're used. Looked at the PDF on the Rapid site - no clue there. They're not even shown. Any guesses? Bulgins own PDF refers to them as Screw sealing grommets, guess to seal under screwhead stop wicking through panel. http://www.bulgin.co.uk/PDFs/CatNo82...ndard_2005.pdf Right. Didn't find that PDF on the Rapid site - they weren't mentioned in the panel mount specific one. But they don't appear to fit in the flange holes so I'm slightly confused about how to fit them? The locking rings dont survive being dropped very far... Oh dear. Hopefully it will get light and careful use. -- *What was the best thing before sliced bread? * Dave Plowman London SW To e-mail, change noise into sound. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Linear Mode
