 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Zanussi hot/cold pipes
Sorry to ask such a dumb question but does anyone have a Zanussi
ZWD1260W and know which way round the hot and cold inlet pipes go? The colour coding has completely disappeared from mine and I wasn't paying much (if any) attention when I took them off. The instruction manual just says that they are colour coded! Many thanks S. |
|
#2
Posted to uk.d-i-y
|
|||
|
|||
|
Zanussi hot/cold pipes
Subterraneo wrote:
Sorry to ask such a dumb question but does anyone have a Zanussi ZWD1260W and know which way round the hot and cold inlet pipes go? The colour coding has completely disappeared from mine and I wasn't paying much (if any) attention when I took them off. The instruction manual just says that they are colour coded! Many thanks S. Forget that. The missus found some tiny writing next to the connectors. Too small and too dim a light for my ageing eyes! Just call me Homer Simpson! :-) |
|
#3
Posted to uk.d-i-y
|
|||
|
|||
|
Zanussi hot/cold pipes
In article , Subterraneo
writes Subterraneo wrote: Sorry to ask such a dumb question but does anyone have a Zanussi ZWD1260W and know which way round the hot and cold inlet pipes go? The colour coding has completely disappeared from mine and I wasn't paying much (if any) attention when I took them off. The instruction manual just says that they are colour coded! Many thanks S. Forget that. The missus found some tiny writing next to the connectors. Too small and too dim a light for my ageing eyes! Just call me Homer Simpson! If in doubt, give it your best guess and start it off on a 40deg wash, which should always be a cold fill. If either fill hose gets warm then you have them the wrong way round. -- fred BBC3, ITV2/3/4, channels going to the DOGs |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Watertight sealant round hot & cold pipes? | UK diy | |||
| Routing cold air through pipes? | UK diy | |||
| Zanussi ZSF4123 dishwasher cold water problem | UK diy | |||
| Zanussi Nexus FL884 - Cold feed gone ? | UK diy | |||
| Hot and cold pipes buried in wall | UK diy | |||
Hybrid Mode
