 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Holesaw for fibreglass?
What's the best holesaw for GRP (acrylic bath and GRP header tank)?
I'm building up a set of the Bosch holesaws but I'm worried they may either chip GRP or the GRP will destroy the saw teeth. Are they OK or would a grit edged one be better, eg: http://www.toolstation.com/shop/Powe.../sd1530/p73155 or would one of these be better: http://www.screwfix.com/prods/43887/...n-Holesaw-20mm ? I have to ask because in both cases I cannot afford *any* mistakes(!) Cheers Tim |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Wiki: Holesaw | UK diy | |||
| Holesaw size for 2 1/4" immersion element ? | UK diy | |||
| Tungsten Tooth Holesaw | Woodworking | |||
| fibreglass | UK diy | |||
| Bi-metal holesaw speed chart. | Metalworking | |||
Threaded Mode
