Hullo again.
I have to drill a hole in my exterior wall for my combi flue, (its
sandstone)
I believe I need one of these big cake cutter type drill bits, what
are they called ? Do I need a special drill or is my little 850w house
drill up to the job ?
Is this the kind of thing I can hire ?
Cheers

"Dave D" wrote in message
om...
Hullo again.
I have to drill a hole in my exterior wall for my combi flue, (its
sandstone)
I believe I need one of these big cake cutter type drill bits, what
are they called ? Do I need a special drill or is my little 850w house
drill up to the job ?
Is this the kind of thing I can hire ?
Cheers

You`ll need a 110mm core cutter. Ebay is your best bet for a cheep one.
I wouldn`t trust a small drill with it though, will probably burn it out.
You might want to invest in a more powerful SDS drill.
Alternatively just hire the lot from your local tool hire

John

In article , Dave D
writes
Hullo again.
I have to drill a hole in my exterior wall for my combi flue, (its
sandstone)
I believe I need one of these big cake cutter type drill bits, what
are they called ? Do I need a special drill or is my little 850w house
drill up to the job ?
Is this the kind of thing I can hire ?
Cheers

http://groups.google.com/groups?as_q...oup=u k.d-i-y

second thread
--
fred (that's grumpy sore throated fred btw :-B)

On 16 Oct 2003 06:44:26 -0700, (Dave D) wrote:

I believe I need one of these big cake cutter type drill bits, what
are they called ? Do I need a special drill or is my little 850w house
drill up to the job ?

Forget using your regular DIY drill - I can guarantee you will burn it
out.

I hired the cake cutter (aka core drill) from the local hire shop
thinking that my 650W black and decker would not let me down if I took
things slowly. The smoke belching out of it combined with the heat
that was coming towards my hand suggested otherwise - and I was hardly
touching the wall.

Went out and bought a cheapo SDS drill - which pushed thru the wall no
problem.

You can hire all this stuff - it may cost you 40-50 quid for a day
(for the core bit, shank and drill combined). For that you can buy a
not unreasonable SDS drill these days, and a core drill on ebay will
be about 15 quid or so.

Hint: On ebay check the sellers web site. I bought one of these cake
cutters recently for my toolbox, paid by PayPal, then went to the guys
web site. The exact same cake cutter (I like that name ) was 5 quid
cheaper. He charges more on ebay to take account of the charges they
apply to each transaction.

PoP

"Dave D" wrote in message
om...
Hullo again.
I have to drill a hole in my exterior wall for my combi flue, (its
sandstone)
I believe I need one of these big cake cutter type drill bits, what
are they called ? Do I need a special drill or is my little 850w house
drill up to the job ?
Is this the kind of thing I can hire ?
Cheers

For a one of job like this, you'll be better going to a hire shop and
getting the right gear for a day. Shop about and get some quotes before
making your final decision. The drill bit you need is called a core cutter
and the drill machine itself needs to be able to handle one of these big
babies, so you can imagine the power it has to have. Hiring one is the
easiest way.

Have a look at the boiler manufacturers requirements for the flue size
you'll need and then make the choice of the size of core cutter you'll need
to do the job. You'll probably be charged for the amount of millimetres you
wear down the cutter, but it is sandstone your cutting through so it
shouldn't wear down that much. It's a small amount to pay for getting the
whole job done in one go.

Good Luck with it. :-))

"BigWallop" wrote in message ...
"Dave D" wrote in message
om...
Hullo again.
I have to drill a hole in my exterior wall for my combi flue, (its
sandstone)
I believe I need one of these big cake cutter type drill bits, what
are they called ? Do I need a special drill or is my little 850w house
drill up to the job ?
Is this the kind of thing I can hire ?
Cheers


Hi All,

I need to do this as well, same story a sandstone wall, but what I was
wondering was will the core cutter actually "hold on" to the core?
The reason I'm asking is because I'm 3 floors up and will be drilling
from the inside out - should I take precautions with pedestrians, or
at the very least my car!

Also I've never fitted a combi before but I was reading through the
installation instructions (for a baxi 105e) and it looks easy enough
to install and commission.
However I've heard that unless you get a CORGI registered bloke to
sign it off the warranty will be void - is this true?
Fair enough I'll get someone qualified in to pipe the gas round to
where I need it, but do I have to pay him to actually fit the boiler?

Cheers,
Stephen

"Ginty" wrote in message
om...
"BigWallop" wrote in message
...
"Dave D" wrote in message
om...
Hullo again.
I have to drill a hole in my exterior wall for my combi flue, (its
sandstone)
I believe I need one of these big cake cutter type drill bits, what
are they called ? Do I need a special drill or is my little 850w house
drill up to the job ?
Is this the kind of thing I can hire ?
Cheers


Hi All,

I need to do this as well, same story a sandstone wall, but what I was
wondering was will the core cutter actually "hold on" to the core?
The reason I'm asking is because I'm 3 floors up and will be drilling
from the inside out - should I take precautions with pedestrians, or
at the very least my car!


It is safer to have someone looking out for slinters falling from this
height to the pavement. You can wait until nearly through the stone before
sending someone out into the cold though. :-))


Also I've never fitted a combi before but I was reading through the
installation instructions (for a baxi 105e) and it looks easy enough
to install and commission.
However I've heard that unless you get a CORGI registered bloke to
sign it off the warranty will be void - is this true?
Fair enough I'll get someone qualified in to pipe the gas round to
where I need it, but do I have to pay him to actually fit the boiler?

Cheers,
Stephen

You are also safer to have the gas work and commissioning done by a CORGI
engineer. That way any come backs if the boiler does go belly up within
warranty, then no one can say it was your faulty DIY installation. The rest
of the system of course is down to you.

The CORGI engineer should only charge you for the work he's done, but check
that he also signs everything off on the full requirements of the boiler
installation sheet.

Hi All
Hired all the kit yesterday, cutting away just nicely, turns out
though its not plaster/bricks/space/sanstone its 30 inches of
sandstone !!!
Its not tough to cut but the corer only does about 8 inches at a time,
so far Ive managed to snap each plug off by jamming a crow bar down
the side. I'm now way inside the wall and cant get any leverage, how
on earth do I snap the plug off ?
Cheers

Hired all the kit yesterday, cutting away just nicely, turns out
though its not plaster/bricks/space/sanstone its 30 inches of
sandstone !!!
Its not tough to cut but the corer only does about 8 inches at a time,
so far Ive managed to snap each plug off by jamming a crow bar down
the side. I'm now way inside the wall and cant get any leverage, how
on earth do I snap the plug off ?

Not sure if you have a Makro near you, or if you have / can borrow a=20
card, but they have a cheap SDS drill with chisel action (comes with=20
about 4 chisel bits IIRC) - it`s about =A330 + VAT - that might do the job

--=20
Please add "[newsgroup]" in the subject of any personal replies via email
* old email address "btiruseless" abandoned due to worm-generated spam *
--- My new email address has "ngspamtrap" & @btinternet.com in it ;-) ---

"Dave D" wrote
| Hired all the kit yesterday, cutting away just nicely, turns out
| though its not plaster/bricks/space/sanstone its 30 inches of
| sandstone !!!
| Its not tough to cut but the corer only does about 8 inches at a time,
| so far Ive managed to snap each plug off by jamming a crow bar down
| the side. I'm now way inside the wall and cant get any leverage, how
| on earth do I snap the plug off ?

(a) Dynamite
(b) Time to start working from the other side and hope you meet in the
middle
(c) Drill some holes in the plug, insert a bloody large Rawlbolt and screw
and screw and screw until it splits the stone, hopefully the plug will come
out in several large chunks

Owain