Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Plumbing problem - tap water takes time
I had a leaky hot water tap on a shower, so I replaced the plastic
rubber O ring bit inside and this stopped the leak. But two weeks later (and possibly unrelated) the same tap when you turn it on puts out no water, it takes about 1 minute for water to start coming out. I am guessing I have a leak in this line. But the pipe goes directly through a solid double concrete wall to the hot water system so there is no access what-so-ever. Because its on the hot water line I can't see my meter moving and I haven't noticed my hot water service filling unusually. Does anyone have any ideas on how to figure out what is going on? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Plumbing: Water quality / filter problem | Home Repair | |||
If it takes along time to sand out planer tears. Is a scraper a better way to start..? | Woodworking | |||
Takes a long time to get hot water to 2nd floor | Home Repair | |||
Hot water takes a long time to flow from sink? | Home Ownership | |||
Hot water plumbing pressure problem | Home Repair |