How easy is it to get a good result (barely visible joint) in a matt
laminate worktop with one of these and a 1/2 inch router.
http://tinyurl.com/dad5ju
http://preview.tinyurl.com/dad5ju

I have one joint to make between two in-line lengths of worktop and one
joint to make between two lengths at right angles.

I was considering getting a fitter in to do the jointing but then I
discovered that jigs could be hired.

I have used a router in the dim and distant past and I do have some old
worktop pieces to practice on but before I hire the jig and router I
would be grateful for advice from anyone who has used a similar jig.

--
Robert