UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to uk.d-i-y
external usenet poster
 
Posts: 43,017
Default Drilling problems (my poor arm)

In article ,
John Rumm wrote:
I double checked its a multipurpose drill bit by bosch which says it
can drill through wood plastic brick etc and is silver and has a
blueband going around the whole of it making it look very cute.


Those are usually very good at masonry - especially when new. Even a
normal hammer drill will make some progress in hard brick with one of
those in it.


They work pretty well into London stocks without hammer action at all. Use
them in my cordless if I can't be bothered getting a proper drill out. ;-)

--
*The only difference between a rut and a grave is the depth.

Dave Plowman London SW
To e-mail, change noise into sound.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Problems with RPTV after lenticular lens replaced. Poor display from angle. [email protected] Electronics Repair 2 February 1st 06 11:01 PM
Problems Drilling Holes - Installing New Cabinet Pulls Brian Woodworking 8 July 14th 04 05:52 PM


All times are GMT +1. The time now is 12:38 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"