Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Poor toilet flush
Hi,
My toilet doesn't flush properly. A reasonable quantity of water comes down, but the side furthest from the cistern doesn't get wet. The unwashed section is about 15cm wide and tends to get smelly. I have noticed that the toilet isn't level and is leaning back. The back of the rim is about 1cm lower than the front. Obviously this isn't ideal, but do you think it's enough to cause the problem? Or should I be concentrating on increasing the water flow. I'm pretty certain there a no obstructions in the rim. I'm less certain about the section between the cistern and the rim - It's so hard to access. Any helpful advice would be very welcome. Thanks Ben |
#2
Posted to uk.d-i-y
|
|||
|
|||
Poor toilet flush
|
#3
Posted to uk.d-i-y
|
|||
|
|||
Poor toilet flush
|
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Poor Flush (update) - The Solution! | UK diy | |||
Poor Flush | UK diy | |||
Toilet flush handle to flush unit connection - What's the secret? | UK diy | |||
toilet doesn't flush well | Home Repair | |||
toilet makes other toilet flush | Home Repair |