Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
BAXI System 35/60 wiring.
I've lost the installation and servicing guide for my BAXI System
35/60 Originally I had downloaded it from the BAXI website, it was originally called 248544.pdf. I have the user guide, but not the install/service guide. Does anyone have a copy they can email me, or link to a download? The reason I need one is because I think the wiring on my boiler may have been disturbed today. The PCB had gone faulty and a new one was fitted. Now the boiler works perfectly under CH demand, but during HW demand the HW demand light comes on, and the pump runs, but the burner never lights. If both HW and CH demand at the same time, the CH light goes out, the burner goes off, but the pump continues to run. Previous to the new board being fitted if CH and HW demand at the same time then both CH and HW lights would stay on and the 3 way valve would operate. email: kenny [ at ] kmillar.co.uk |
#2
Posted to uk.d-i-y
|
|||
|
|||
BAXI System 35/60 wiring.
On Jan 4, 5:13*pm, kmillar wrote:
I've lost the installation and servicing guide for my BAXI System 35/60 Originally I had downloaded it from the BAXI website, it was originally called 248544.pdf. I have the user guide, but not the install/service guide. Does anyone have a copy they can email me, or link to a download? The reason I need one is because I think the wiring on my boiler may have been disturbed today. The PCB had gone faulty and a new one was fitted. Now the boiler works perfectly under CH demand, but during HW demand the HW demand light comes on, and the pump runs, but the burner never lights. If both HW and CH demand at the same time, the CH light goes out, the burner goes off, but the pump continues to run. Previous to the new board being fitted if CH and HW demand at the same time then both CH and HW lights would stay on and the 3 way valve would operate. email: kenny [ at ] kmillar.co.uk Never mind! I found the problem - the wiring was absolutlely fine, the problem was that SAN pot on the new PCB had been turned down too far. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
BAXI System 35/60 Boiler fault. PCB? | UK diy | |||
Baxi boiler / New heating/water system problems - help please!!! | UK diy | |||
Baxi RS boiler wiring | UK diy | |||
Can a Baxi Platinum 24HE *System* Boiler be converted into a *Combi*? | UK diy | |||
Baxi 'System' Boiler - pressure question | UK diy |