Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
I'm after a clever idea for making a new lid for my cold water tank. The
old one was plywood, and the condensation wrought havoc with it. The tank is 31" x 34". Bright ideas please. Keith |
#2
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
"Keith Dunbar" wrote in message ... I'm after a clever idea for making a new lid for my cold water tank. The old one was plywood, and the condensation wrought havoc with it. The tank is 31" x 34". Bright ideas please. Keith Plastic. Mary |
#3
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
"Keith Dunbar" wrote in message ... I'm after a clever idea for making a new lid for my cold water tank. The old one was plywood, and the condensation wrought havoc with it. The tank is 31" x 34". Bright ideas please. A dustbin bag cut open with a bit of string tied round it is all you really need to keep creepy crawlies out of the tank and condensation out of the loft. Can't say I've ever bothered though which is why huge chunks of hairy chitinous spider remains end up in my bathwater all the time. I think that's probably enough to indicate I'm not married. -- Dave Baker - Puma Race Engines |
#4
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
"Mary Fisher" wrote in message t... "Keith Dunbar" wrote in message ... I'm after a clever idea for making a new lid for my cold water tank. The old one was plywood, and the condensation wrought havoc with it. The tank is 31" x 34". Bright ideas please. Keith Plastic. Mary Hello Mary, Could you elaborate please - I'm not feeling very bright or creative this morning. Keith |
#5
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
Keith Dunbar wrote:
"Mary Fisher" wrote in message t... "Keith Dunbar" wrote in message ... I'm after a clever idea for making a new lid for my cold water tank. The old one was plywood, and the condensation wrought havoc with it. The tank is 31" x 34". Bright ideas please. Keith Plastic. Mary Hello Mary, Could you elaborate please - I'm not feeling very bright or creative this morning. Keith Think 'jamjar cover' |
#6
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
On Wed, 28 Nov 2007 09:27:12 +0000, Keith Dunbar wrote:
I'm after a clever idea for making a new lid for my cold water tank. The old one was plywood, and the condensation wrought havoc with it. The tank is 31" x 34". Bright ideas please. Estate agent's signboard material (corrugated plastic) Readily available & free :-) Larger sizes sometimes available as temporary road signs (I've got one that was used to announce that a 1-way system was going to be introduced in a nearby street). -- John Stumbles Who's *really* behind all these conspiracy theories? |
#7
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
On Wed, 28 Nov 2007 09:27:12 GMT someone who may be "Keith Dunbar"
wrote this:- I'm after a clever idea for making a new lid for my cold water tank. The old one was plywood, and the condensation wrought havoc with it. Plastic has already been suggested. Sheets of it are available from large orange tin sheds and other outlets. Alternatively make it out of wood and put a sheet of plastic underneath to repel the condensation. If it is a standard size, ready made lids are available. -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 |
#8
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
"Keith Dunbar" wrote in message ... "Mary Fisher" wrote in message t... "Keith Dunbar" wrote in message ... I'm after a clever idea for making a new lid for my cold water tank. The old one was plywood, and the condensation wrought havoc with it. The tank is 31" x 34". Bright ideas please. Keith Plastic. Mary Hello Mary, Could you elaborate please - I'm not feeling very bright or creative this morning. Keith John and David have made suggestions :-) Since it's not going to be seen any rigid plastic of the right size will do, you con't have to be particularly creative or bright :-))) Mary |
#9
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
David Hansen wrote:
If it is a standard size, ready made lids are available. Yes IIRC B&Q sell black plastic ones alongside their cold water tanks. David |
#10
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
Lobster wrote:
David Hansen wrote: If it is a standard size, ready made lids are available. Yes IIRC B&Q sell black plastic ones alongside their cold water tanks. BES do them as well, but not in the size the OP specced... -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#11
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
On Wed, 28 Nov 2007 09:27:12 GMT, Keith Dunbar wrote:
I'm after a clever idea for making a new lid for my cold water tank. See if there is a label on the tank for a maker and visit your local plumbers merchant for a suitable lid. Lot easier than messing about trying to make or improvise something... If you do make one you need to think about where the condensation is going go. If you just bung a rigid flat sheet over the top the chances are the condensation will run to one edge/corner, capillary action between the tank and lid and drip/run down the outside of the tank rotting the supports (worst case). Bin bag will do but they are a bit fragile, heavy polythene (opened out feed bag or compost bag?) would be better if you can secure it. Small weight in the middle to produce a drip point for the condensation. -- Cheers Dave. pam is missing e-mail |
#12
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
"Dave Liquorice" wrote in message ll.net... On Wed, 28 Nov 2007 09:27:12 GMT, Keith Dunbar wrote: I'm after a clever idea for making a new lid for my cold water tank. See if there is a label on the tank for a maker and visit your local plumbers merchant for a suitable lid. Lot easier than messing about trying to make or improvise something... If you do make one you need to think about where the condensation is going go. If you just bung a rigid flat sheet over the top the chances are the condensation will run to one edge/corner, capillary action between the tank and lid and drip/run down the outside of the tank rotting the supports (worst case). Bin bag will do but they are a bit fragile, heavy polythene (opened out feed bag or compost bag?) would be better if you can secure it. Small weight in the middle to produce a drip point for the condensation. -- Cheers Dave. pam is missing e-mail Do you need to allow for an expansion pipe that is curved over the top? |
#13
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
On Wed, 28 Nov 2007 15:16:01 GMT someone who may be "John"
wrote this:- If you do make one you need to think about where the condensation is going go. If you just bung a rigid flat sheet over the top the chances are the condensation will run to one edge/corner, capillary action between the tank and lid and drip/run down the outside of the tank rotting the supports (worst case). Bin bag will do but they are a bit fragile, heavy polythene (opened out feed bag or compost bag?) would be better if you can secure it. Small weight in the middle to produce a drip point for the condensation. Do you need to allow for an expansion pipe that is curved over the top? One needs to allow for a certain number of things, including any vent pipe (and how one is going to get the lid on under it) and a means of keeping the lid on. Details like this are left as an exercise for the reader. -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 |
#14
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
|
#15
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
On 28 Nov, 20:28, Skipweasel wrote:
In article , says... Bright ideas please. Find a building site and scrounge an offcut of polystyrene or other foam-type wall insulation. A 4" slab of that will make a nice lid, help prevent freezing /and/ be rotproof. -- Skipweasel. Never knowingly understood. Use Marine Plywood |
#16
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
Merryterry wrote:
Use Marine Plywood I'm surprised no-one (unless I missed it) has mentioned the insulating covers available from hardware stores. |
#17
Posted to uk.d-i-y
|
|||
|
|||
Lid for cold water tank
"Timothy Murphy" wrote in message ... Merryterry wrote: Use Marine Plywood I'm surprised no-one (unless I missed it) has mentioned the insulating covers available from hardware stores. You missed it :-) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cold water tank. | Home Repair | |||
Moving a Hot Water Cylinder & Cold Water Tank | UK diy | |||
Pipe run between Cold water tank and hot water cylinder. | UK diy | |||
Cold Water Tank Valve | UK diy | |||
Cold Water Storage Tank | UK diy |