Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Word needed, "bump" at end of cylinder
Hi, looking for the technical name for a small cube at the end of a
cylindrical button, the button gets fed through the cover and the cube stops the button coming right through. There are four cubes if that makes any difference. ta |
#2
Posted to uk.d-i-y
|
|||
|
|||
Word needed, "bump" at end of cylinder
On 27 Jun, 09:50, misterroy wrote:
Hi, looking for the technical name for a small cube at the end of a cylindrical button, the button gets fed through the cover and the cube stops the button coming right through. There are four cubes if that makes any difference. Hard to understand what you're describing here, but they'd usually be termed a "lug" and may be part of a "bayonet lock" (if you rotate the cylinder to lock it in place using the lugs). |
#3
Posted to uk.d-i-y
|
|||
|
|||
Word needed, "bump" at end of cylinder
"misterroy" wrote in message oups.com... Hi, looking for the technical name for a small cube at the end of a cylindrical button, the button gets fed through the cover and the cube stops the button coming right through. There are four cubes if that makes any difference. ta Flange? A protruding rim, edge, rib, or collar, as on a pipe shaft, used to strengthen an object, hold it in place, or attach it to another object. -- Graham. %Profound_observation% |
#4
Posted to uk.d-i-y
|
|||
|
|||
Word needed, "bump" at end of cylinder
"misterroy" wrote in message oups.com... Hi, looking for the technical name for a small cube at the end of a cylindrical button, the button gets fed through the cover and the cube stops the button coming right through. There are four cubes if that makes any difference. ta Lug. |
#5
Posted to uk.d-i-y
|
|||
|
|||
Word needed, "bump" at end of cylinder
On Jun 27, 8:55 pm, ":Jerry:" wrote:
"misterroy" wrote in message oups.com... Hi, looking for the technical name for a small cube at the end of a cylindrical button, the button gets fed through the cover and the cube stops the button coming right through. There are four cubes if that makes any difference. ta Lug. thanks, it wasnt even near the tip of my tongue, but they are lugs. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
"Flipping" IS NOT a dirty word... | Home Ownership | |||
Orange Peel Texture? "Knockdown" or "Skip Trowel" also "California Knock-down" | Home Repair | |||
Delta "Auto Set" miter gauge info needed | Woodworking | |||
"bump keys" | UK diy | |||
Standard or "Superduty" hot water cylinder? | UK diy |