Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
can I fit a light in the bathroom?
Mate at work wants to remove a spotlight over the bath (not a zone1 fitting
so very naughty) and replace with one of those extractors combined with a light in the middle that are built for the purpose. does he need a part p electrician to do this or can he DIY ? and just for sake of asking, could he put a Zone1 fitting (just a light) on his own or again Part P sparks only? TIA -- Vass '02 R1, '90 CBR1000F www.doubleyolk.co.uk |
#2
Posted to uk.d-i-y
|
|||
|
|||
can I fit a light in the bathroom?
On Wed, 25 Apr 2007 15:48:37 +0100 someone who may be "Vass"
wrote this:- Mate at work wants to remove a spotlight over the bath (not a zone1 fitting so very naughty) How "naughty" the situation is depends on when it was installed and the precise construction of the fitting. and replace with one of those extractors combined with a light in the middle that are built for the purpose. does he need a part p electrician to do this or can he DIY ? Assuming your mate's house is in England or Wales he can: 1) get an electrician qualified to self-certify work to do it 2) do it himself and fill in the paperwork for a council official to inspect it 3) do it himself Note that the third option might be described as "naughty" by the likes of Mr Prescott. -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 |
#3
Posted to uk.d-i-y
|
|||
|
|||
can I fit a light in the bathroom?
"David Hansen" wrote in message ... On Wed, 25 Apr 2007 15:48:37 +0100 someone who may be "Vass" wrote this:- Mate at work wants to remove a spotlight over the bath (not a zone1 fitting so very naughty) How "naughty" the situation is depends on when it was installed and the precise construction of the fitting. and replace with one of those extractors combined with a light in the middle that are built for the purpose. does he need a part p electrician to do this or can he DIY ? Assuming your mate's house is in England or Wales he can: 1) get an electrician qualified to self-certify work to do it 2) do it himself and fill in the paperwork for a council official to inspect it 3) do it himself Note that the third option might be described as "naughty" by the likes of Mr Prescott. -- David Hansen, Edinburgh As naughty as giving a heckler a left hook, or more naughty ? Or perhaps as naughty as bonking your staff maybe?? AWEM |
#4
Posted to uk.d-i-y
|
|||
|
|||
can I fit a light in the bathroom?
"David Hansen" wrote in message ... On Wed, 25 Apr 2007 15:48:37 +0100 someone who may be "Vass" wrote this:- Mate at work wants to remove a spotlight over the bath (not a zone1 fitting so very naughty) How "naughty" the situation is depends on when it was installed and the precise construction of the fitting. and replace with one of those extractors combined with a light in the middle that are built for the purpose. does he need a part p electrician to do this or can he DIY ? Assuming your mate's house is in England or Wales he can: 1) get an electrician qualified to self-certify work to do it 2) do it himself and fill in the paperwork for a council official to inspect it 3) do it himself Note that the third option might be described as "naughty" by the likes of Mr Prescott. -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 David, I'm planning to replace an electric shower unit and uprate the cable. I also thought your option 2 was valid but I can't find the reference to it in the IEE guide. Also, the local council building control have said I need to approach an approved electrician. Can you give me a pointer to where it says that this approach is allowed? Regards Phil |
#5
Posted to uk.d-i-y
|
|||
|
|||
can I fit a light in the bathroom?
On Thu, 26 Apr 2007 10:26:16 +0100 someone who may be "Phil B"
wrote this:- 2) do it himself and fill in the paperwork for a council official to inspect it I'm planning to replace an electric shower unit and uprate the cable. I also thought your option 2 was valid but I can't find the reference to it in the IEE guide. Also, the local council building control have said I need to approach an approved electrician. Can you give me a pointer to where it says that this approach is allowed? Use a search engine on this group. It is covered in great detail, with references to the legislation. -- David Hansen, Edinburgh I will *always* explain revoked encryption keys, unless RIP prevents me http://www.opsi.gov.uk/acts/acts2000/00023--e.htm#54 |
#6
Posted to uk.d-i-y
|
|||
|
|||
can I fit a light in the bathroom?
On Wed, 25 Apr 2007 15:48:37 +0100, a particular chimpanzee, "Vass"
randomly hit the keyboard and produced: Mate at work wants to remove a spotlight over the bath (not a zone1 fitting so very naughty) and replace with one of those extractors combined with a light in the middle that are built for the purpose. does he need a part p electrician to do this or can he DIY ? and just for sake of asking, could he put a Zone1 fitting (just a light) on his own or again Part P sparks only? If it only involves a replacement and does not require any new fixed cabling, it doesn't need to be notified. The new work should meet current guidance, but who's to know (except the Coroner)? -- Hugo Nebula "If no-one on the internet wants a piece of this, just how far from the pack have you strayed?" |
#7
Posted to uk.d-i-y
|
|||
|
|||
can I fit a light in the bathroom?
On 25 Apr, 19:12, Hugo Nebula abuse@localhost wrote:
On Wed, 25 Apr 2007 15:48:37 +0100, a particular chimpanzee, "Vass" randomly hit the keyboard and produced: Mate at work wants to remove a spotlight over the bath (not a zone1 fitting so very naughty) and replace with one of those extractors combined with a light in the middle that are built for the purpose. does he need a part p electrician to do this or can he DIY ? and just for sake of asking, could he put a Zone1 fitting (just a light) on his own or again Part P sparks only? If it only involves a replacement and does not require any new fixed cabling, it doesn't need to be notified. The new work should meet current guidance, but who's to know (except the Coroner)? -- Hugo Nebula "If no-one on the internet wants a piece of this, just how far from the pack have you strayed?" I cant see where the part P approved document says that. According to the approved document "any" work in a bathroom requires notification. The list of non notifiable "minor works" specifically excludes bathrooms and other such locations from the exemptions |
#8
Posted to uk.d-i-y
|
|||
|
|||
can I fit a light in the bathroom?
cynic wrote:
On 25 Apr, 19:12, Hugo Nebula abuse@localhost wrote: If it only involves a replacement and does not require any new fixed cabling, it doesn't need to be notified. The new work should meet current guidance, but who's to know (except the Coroner)? I cant see where the part P approved document says that. Page 8, additional notes, note b. -- Andy |
#9
Posted to uk.d-i-y
|
|||
|
|||
can I fit a light in the bathroom?
On 26 Apr 2007 10:26:12 -0700, a particular chimpanzee, cynic
randomly hit the keyboard and produced: On 25 Apr, 19:12, Hugo Nebula abuse@localhost wrote: If it only involves a replacement and does not require any new fixed cabling, it doesn't need to be notified. I cant see where the part P approved document says that. According to the approved document "any" work in a bathroom requires notification. The list of non notifiable "minor works" specifically excludes bathrooms and other such locations from the exemptions Table 1 [Work that need not be notified to Building Control bodies], line 1. -- Hugo Nebula "If no-one on the internet wants a piece of this, just how far from the pack have you strayed?" |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How to shorten christmas light strings to fit your need | Home Repair | |||
Decent plumber to fit bathroom | UK diy | |||
French bathroom fittings - will they fit here? | UK diy | |||
Correct order to fit a bathroom and then tile? | UK diy | |||
Fit bathroom accessories before or after tiling? | UK diy |