Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
bending cable
OK guys how do you do it?
I have the 10mm cable from supply and shower going to my switch all good so far but cramming it all into the metal box gives rise to me thinking I'm going to have these connections come loose soon as they will be under so much pressure inside So whats the form? TIA -- Vass YZF-R1, CBR1000F Beer is the answer, but I can't remember the question. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Is it safe to assume RG6 cable strippers and cable connectors are going to be compatible? | Home Repair | |||
Intermittent static when viewing cable, cable ready problem? | Electronics Repair | |||
Intermittent static when viewing cable, cable ready problem? | Home Repair | |||
Bending/twisting wood (was Bending Oak) | Woodworking | |||
Pulling cable through with existing one / Clipping cable in loft | UK diy |