 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Problem seating a monobloc tap in a bathroom basin
Seasons greetings.
I'm putting in a new bathroom (ceramic) basin with a monobloc tap. The tap has a flange with O-ring at the bottom, to form a seal with the basin. Unfortunately the hole in the basin has a curved edge which prevents the tap from seating properly (i.e. the top of the hole is more funnel-shaped, than a cylinder). Any suggestions on how to get round this gratefully received. Cheers, Steve |
|
#2
Posted to uk.d-i-y
|
|||
|
|||
|
Problem seating a monobloc tap in a bathroom basin
On Mon, 1 Jan 2007 16:59:47 -0000, "Steve"
wrote: Seasons greetings. I'm putting in a new bathroom (ceramic) basin with a monobloc tap. The tap has a flange with O-ring at the bottom, to form a seal with the basin. Unfortunately the hole in the basin has a curved edge which prevents the tap from seating properly (i.e. the top of the hole is more funnel-shaped, than a cylinder). Any suggestions on how to get round this gratefully received. Cheers, Steve Make it a cylinder with body filler keeping within the diameter of the tap so it does not show? |
|
#3
Posted to uk.d-i-y
|
|||
|
|||
|
Problem seating a monobloc tap in a bathroom basin
Thanks EricP, might give that a try.
Steve "EricP" wrote in message ... On Mon, 1 Jan 2007 16:59:47 -0000, "Steve" wrote: Seasons greetings. I'm putting in a new bathroom (ceramic) basin with a monobloc tap. The tap has a flange with O-ring at the bottom, to form a seal with the basin. Unfortunately the hole in the basin has a curved edge which prevents the tap from seating properly (i.e. the top of the hole is more funnel-shaped, than a cylinder). Any suggestions on how to get round this gratefully received. Cheers, Steve Make it a cylinder with body filler keeping within the diameter of the tap so it does not show? |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Monobloc tap tails | UK diy | |||
| removing and adding kitchen monobloc tap , does tap spanner exist? | UK diy | |||
| monobloc sink tap fitting | UK diy | |||
| Monobloc tap | UK diy | |||
| Monobloc tap fixing advice | UK diy | |||
Linear Mode
