Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Wiring split load CU
On wiring the split load CU, will it be OK to put both the cooker and
hob onto the RCD'd busbar? or should they go onto the non RCD side? I was thinking of putting both ring mains on the RCD and the cooker/hob, and putting both lighting ccts on the non RCD side so I'm not plunged into darkness if there is a fault elsewhere !! CU is 100A, 80A rcd cheers |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Buying a new house - wiring calculator? | Home Ownership | |||
Boiler wiring | UK diy | |||
Wiring load question | UK diy | |||
Wiring diagram for old central heating system | UK diy | |||
Help! RCD Keeps tripping on new wiring | UK diy |