Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
crossing mains cables at right angles
On the kitchen install there is one run that would be better if two
cables crossed at 90, they would both be in the "zones" I was just wondering if this is OK, or is there an issue with possible eddy currents as one would be drawing a large amount of current (hob) and the other a "nats chuff" 8w flourescent. thanks |
#2
Posted to uk.d-i-y
|
|||
|
|||
crossing mains cables at right angles
In article .com,
"Staffbull" writes: On the kitchen install there is one run that would be better if two cables crossed at 90, they would both be in the "zones" I was just wondering if this is OK, or is there an issue with possible eddy currents as one would be drawing a large amount of current (hob) and the other a "nats chuff" 8w flourescent. No problem. -- Andrew Gabriel |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
How to tell which pipe is the mains? | UK diy | |||
20A Junction boxes take only 3 cables? | UK diy | |||
Mains Dimmer buzzing question | UK diy | |||
Mains failure generator switching tips? | UK diy | |||
Jointing mains cables | UK diy |