hi
about 3 weeks ago the boiler stopped igniting when hot water/ch water
was called for. after a couple of days of turning switches off and on
and checking for loose connections the boiler just started working
again.

however its' stopped igniting again now and the turning off and on
hasn't cured it.

any help on what action i should take now would be appreciated
especially now the temperature is turning on the chilly side. i'm goin'
to need that heat soon
cheers
--
dave griffiths

On Fri, 22 Sep 2006 11:49:32 +0000, dave griffiths wrote:

hi
about 3 weeks ago the boiler stopped igniting when hot water/ch water
was called for. after a couple of days of turning switches off and on
and checking for loose connections the boiler just started working
again.

however its' stopped igniting again now and the turning off and on
hasn't cured it.

any help on what action i should take now would be appreciated
especially now the temperature is turning on the chilly side. i'm goin'
to need that heat soon
cheers

Check all ignition parts, for the shorts, breaks and crud. Or get help to
do this.


--
Ed Sirett - Property maintainer and registered gas fitter.
The FAQ for uk.diy is at http://www.diyfaq.org.uk
Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html
Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html
Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html
Gas Fitting Standards Docs he http://www.makewrite.demon.co.uk/GasFittingStandards