Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
cheap sheet roofing
Just got to bodge up the asbestos garage for another year. Need to replace a pitched roof panel around but less than 8'x4'. In the past I had a thin sheet of ply (~5mm) Then coated it with 3 coats of bitumen paint I also had lying around. Now I've only got the paint. What's my cheapest solution i.e. what sheeting do I buy? I'm sure it will be a compromise based on its weight and it not blowing off! -- Mike W |
#2
Posted to uk.d-i-y
|
|||
|
|||
cheap sheet roofing
visionset wrote:
Just got to bodge up the asbestos garage for another year. Need to replace a pitched roof panel around but less than 8'x4'. In the past I had a thin sheet of ply (~5mm) Then coated it with 3 coats of bitumen paint I also had lying around. Now I've only got the paint. What's my cheapest solution i.e. what sheeting do I buy? I'm sure it will be a compromise based on its weight and it not blowing off! if the existing sheet is broken in 1 or 2 places it could be repaired with resin, £5-10 from screwstation&Q NT |
#3
Posted to uk.d-i-y
|
|||
|
|||
cheap sheet roofing
On Thu, 07 Sep 2006 15:34:01 -0700, meow2222 wrote:
Just got to bodge up the asbestos garage for another year. if the existing sheet is broken in 1 or 2 places it could be repaired with resin, £5-10 from screwstation&Q Sheet of 5mm ply is 9 quid, old sheet was asbestos and in many pieces. Thanks all the same. |
#4
Posted to uk.d-i-y
|
|||
|
|||
cheap sheet roofing
visionset wrote:
On Thu, 07 Sep 2006 15:34:01 -0700, meow2222 wrote: Just got to bodge up the asbestos garage for another year. if the existing sheet is broken in 1 or 2 places it could be repaired with resin, £5-10 from screwstation&Q Sheet of 5mm ply is 9 quid, old sheet was asbestos and in many pieces. Thanks all the same. Youd be hard pressed to find anything cheaper than that. Chip sure aint no use for roofing. NT |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cheap phone cord (related to cheap extension cords) | Home Repair | |||
Metal Roofing | Home Repair | |||
A new low in cheap tools? | Metalworking | |||
sheet metal gas engine project | Metalworking | |||
Rolled Roofing Blowing Off Manufactured Home, Repair Expensive? | Home Ownership |