Home |
Search |
Today's Posts |
![]() |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On 1 Aug 2006 14:04:27 -0700, robgraham wrote:
I saw a comment I think in this NG about finding replacement B & S engines - the one on my cylinder lawn mower has lost compression and I can't find why despite stripping most of it down and the solution seems to be to find a replacement. The question is where to go to ? Probably cheaper to go to one of the sheds and buy a whole new mower than getting a new engine from your local B&S dealer. If you existing body etc is good buy a really cheapy mower just for the engine and dump all the new body bits. Though if your careful with choice many parts could be used as spares... -- Cheers Dave. pam is missing e-mail |
#2
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]() Dave Liquorice wrote: On 1 Aug 2006 14:04:27 -0700, robgraham wrote: I saw a comment I think in this NG about finding replacement B & S engines - the one on my cylinder lawn mower has lost compression and I can't find why despite stripping most of it down and the solution seems to be to find a replacement. The question is where to go to ? Probably cheaper to go to one of the sheds and buy a whole new mower than getting a new engine from your local B&S dealer. If you existing body etc is good buy a really cheapy mower just for the engine and dump all the new body bits. Though if your careful with choice many parts could be used as spares... -- Cheers Dave. pam is missing e-mail Thanks for all your replies and the ideas, guys; can't be sure but sure but someone somewhere talked about some sort of dump near him where old mowers etc ended up and I wondered what sort of dump - no doubt if I did find such a place locally I wouldn't be allowed to do the logical thing of recycling, but it's probably worth some beer tokens to get the guy to switch his eyes somewhere else for 5 minutes. I'll try searching the archives of the NG's I use. Cheers Rob |
#3
![]()
Posted to uk.d-i-y
|
|||
|
|||
![]()
On 3 Aug 2006 01:06:53 -0700, robgraham wrote:
some sort of dump near him where old mowers etc ended up and I wondered what sort of dump The local council dump, I think they call them "household waste amenity centres" or something with recycling in the name these days. -- Cheers Dave. pam is missing e-mail |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Building a Homemade Fuel-Injection System on a Briggs and Stratton 5 HP Engine | Metalworking | |||
Go-Kart engine problems (Briggs and Stratton) | Home Repair | |||
Briggs & Stratton 120000 vs 130000 engine | Metalworking | |||
Briggs & Stratton 5HP engine won't stay running | Home Repair | |||
How do I fond RPM in Briggs & Stratton engine | Home Repair |