Anyone care to recommend any particular current make/range?
This is to replace ancient Potterton Netaheat 16kW in well insulated 4
bed detached house.
The hot water cylinder and loft storage tank to be retained.
If combi is used the hot water flow rate is not important as it will
only be used to feed kitchen.

I have read Ed Sirett's faq on picking a boiler but finding out which
of those features boilers actually have is hard work. e.g. Alpha have
been mentioned here but their very annoying website is not very
illuminating.

"OldBill" wrote in message
oups.com...

Anyone care to recommend any
particular current make/range?
This is to replace ancient Potterton
Netaheat 16kW in well insulated 4
bed detached house.
The hot water cylinder and loft storage
tank to be retained.

Why? What is your mains pressue and flow like? How amny baths, showers,
etc. Give as much info as possible to avoid a to and fro.

If combi is used the hot water flow
rate is not important as it will
only be used to feed kitchen.

You don't have abathroom? :-)

I have read Ed Sirett's faq on picking a boiler but finding out which
of those features boilers actually have is hard work. e.g. Alpha have
been mentioned here but their very annoying website is not very
illuminating.

The FAQ is about 20 years behind.

"OldBill" wrote in message
oups.com...
Anyone care to recommend any particular current make/range?
This is to replace ancient Potterton Netaheat 16kW in well insulated 4
bed detached house.
The hot water cylinder and loft storage tank to be retained.
If combi is used the hot water flow rate is not important as it will
only be used to feed kitchen.

I have read Ed Sirett's faq on picking a boiler but finding out which
of those features boilers actually have is hard work. e.g. Alpha have
been mentioned here but their very annoying website is not very
illuminating.

We've got an Alpha CD32C and it's brilliant. Can't understand why you're
having problems with the Alpha website. If you want tech. specs and
comparisons of their products, simply hover over "Boilers - High Efficiency
Range" and when sub-menu pops out, click on "Feature / Technical
Comparisons", then, in the right-hand pane, click on "Click here to launch
comparisons table"

John.

John wrote:
"OldBill" wrote in message
oups.com...
Anyone care to recommend any particular current make/range?
...
I have read Ed Sirett's faq on picking a boiler but finding out which
of those features boilers actually have is hard work. e.g. Alpha have
been mentioned here but their very annoying website is not very
illuminating.

We've got an Alpha CD32C and it's brilliant. Can't understand why you're
having problems with the Alpha website. If you want tech. specs and
comparisons of their products, simply hover over "Boilers - High Efficiency
Range" and when sub-menu pops out, click on "Feature / Technical
Comparisons", then, in the right-hand pane, click on "Click here to launch
comparisons table"

John.


I have that here printed out in all its fine colours, but it answers few
points in Ed's faq. e.g what is heat exchanger made from? For some of
their boilers you can download pdfs with more info but not others.
Why is their website cramped in such a small window? perhaps its
designed for pda users..

Doctor Drivel wrote:

"OldBill" wrote in message
oups.com...

Anyone care to recommend any
particular current make/range?
This is to replace ancient Potterton
Netaheat 16kW in well insulated 4
bed detached house.
The hot water cylinder and loft storage
tank to be retained.

Why? What is your mains pressue and flow like? How amny baths,
showers, etc. Give as much info as possible to avoid a to and fro.

If combi is used the hot water flow
rate is not important as it will
only be used to feed kitchen.

You don't have a bathroom? :-)
....
mains pressure & flow are good. 2 bathrooms. Pumped showers over baths
are fine with current arrangement. Want to keep stored water tank in loft.
Some time ago in another property I used a combi as a system boiler in a
similar setup because it was actually cheaper. I believe you recommended
this at the time...
Not sure what current models are in favour, went into local trade place
who had 5 or 6 condensing boilers at good prices but mainly turned out
to be re-hashed combis with extra heat exchanger bolted on. They sell
'em "because the trade are familiar with them"

"OldBill" wrote in message
...
Doctor Drivel wrote:

"OldBill" wrote in message
oups.com...

Anyone care to recommend any
particular current make/range?
This is to replace ancient Potterton
Netaheat 16kW in well insulated 4
bed detached house.
The hot water cylinder and loft storage
tank to be retained.

Why? What is your mains pressue and flow like? How amny baths, showers,
etc. Give as much info as possible to avoid a to and fro.

If combi is used the hot water flow
rate is not important as it will
only be used to feed kitchen.

You don't have a bathroom? :-)
...
mains pressure & flow are good. 2 bathrooms. Pumped showers over baths are
fine with current arrangement. Want to keep stored water tank in loft.

Why? To have toilets running in case of a water cut? In one arrangement I
suggested keep the tank supplying only the toilets and cold to the baths, as
the baths would not have mixer taps. Then a supply of water in case. Then
a combi doing the hot water and the mains doing the rest of the cold
supplies.

Some time ago in another property I used a
combi as a system boiler in a similar setup because it was actually
cheaper.

Yep. they can be .

I believe you recommended this at the time...
Not sure what current models are in favour, went into local trade place
who had 5 or 6 condensing boilers at good prices but mainly turned out to
be re-hashed combis with extra heat exchanger bolted on. They sell 'em
"because the trade are familiar with them"

No.because the trade don't know any difference and they get a big discount
on this cheap crap.

"OldBill" wrote in message
...
John wrote:
"OldBill" wrote in message
oups.com...

Anyone care to recommend any particular current make/range?
...
I have read Ed Sirett's faq on picking a boiler but finding out which
of those features boilers actually have is hard work. e.g. Alpha have
been mentioned here but their very annoying website is not very
illuminating.

We've got an Alpha CD32C and it's brilliant. Can't understand why you're
having problems with the Alpha website. If you want tech. specs and
comparisons of their products, simply hover over "Boilers - High
Efficiency Range" and when sub-menu pops out, click on "Feature /
Technical Comparisons", then, in the right-hand pane, click on "Click
here to launch comparisons table"

John.
I have that here printed out in all its fine colours, but it answers few
points in Ed's faq. e.g what is heat exchanger made from?

Worcester-Bosch sell the Greenstar range of aluminium silicon coated heat
exchangers. Great boilers.

For some of their boilers you can download pdfs with more info but not
others.
Why is their website cramped in such a small window? perhaps its designed
for pda users..

I managed to download the installation instructions. The heat exchanger is
stainless steel.