Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Plastic tube with 28mm internal bore?
25mm plastic conduit (internal bore around 22mm) makes an ideal sleeve
for 15mm copper tube passing through a wall. I've looked and looked over the years but never found anything with quite such a good fit for 22mm tube. There's about 3mm all round a 15mm tube with 25mm conduit. Based on that the tube needs to be around 28mm internal dia or 31mm o/d.. 32mm waste is around 35 o/d - rather more play than ideal. Any suggestions please? TIA |
#2
Posted to uk.d-i-y
|
|||
|
|||
Plastic tube with 28mm internal bore?
On Mon, 10 Apr 2006 09:35:26 -0700, jim_in_sussex wrote:
25mm plastic conduit (internal bore around 22mm) makes an ideal sleeve for 15mm copper tube passing through a wall. I've looked and looked over the years but never found anything with quite such a good fit for 22mm tube. There's about 3mm all round a 15mm tube with 25mm conduit. Based on that the tube needs to be around 28mm internal dia or 31mm o/d.. 32mm waste is around 35 o/d - rather more play than ideal. Any suggestions please? 28mm Hep20, but expensive unless you have offcuts |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sanyo CE21A2 TV arcing in tube neck between anodes at switch-on | Electronics Repair | |||
Looking for somebody in the UK to make an internal threaded brass 45mm dia tube | Metalworking | |||
Joining Plastic Waste pipe to Lead pipe | UK diy | |||
rolling a bead on tube ends | Metalworking | |||
Plastic Pipes in central heating | UK diy |