Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Towel rail repair and fitting advice needed.
I bought a water heated towel rail from eBay. It has some dents in the
lower horizontal rail. Does it look like I'd be able to heat the joints at both ends of the rail and rotate the dents to the back without losing the water seal? Also, would the flow be best going in at the top and return from the connection at the bottom? Here's a pictu www.gooseisland.plus.com TIA -- Regards, Mike Halmarack Drop the (EGG) to email me. |
#2
Posted to uk.d-i-y
|
|||
|
|||
Towel rail repair and fitting advice needed.
Mike Halmarack wrote:
I bought a water heated towel rail from eBay. It has some dents in the lower horizontal rail. Does it look like I'd be able to heat the joints at both ends of the rail and rotate the dents to the back without losing the water seal? Also, would the flow be best going in at the top and return from the connection at the bottom? Here's a pictu www.gooseisland.plus.com TIA -- Regards, Mike Halmarack Drop the (EGG) to email me. so thats where me Zimmer went. ;-) -- Sir Benjamin Middlethwaite |
#3
Posted to uk.d-i-y
|
|||
|
|||
Towel rail repair and fitting advice needed.
On Sun, 09 Apr 2006 13:31:54 GMT, "The3rd Earl Of Derby"
wrote: Mike Halmarack wrote: I bought a water heated towel rail from eBay. It has some dents in the lower horizontal rail. Does it look like I'd be able to heat the joints at both ends of the rail and rotate the dents to the back without losing the water seal? Also, would the flow be best going in at the top and return from the connection at the bottom? Here's a pictu www.gooseisland.plus.com TIA -- Regards, Mike Halmarack Drop the (EGG) to email me. so thats where me Zimmer went. ;-) I wish you' d've driven it more carefully. -- Regards, Mike Halmarack Drop the (EGG) to email me. |
#4
Posted to uk.d-i-y
|
|||
|
|||
Towel rail repair and fitting advice needed.
Mike Halmarack wrote:
On Sun, 09 Apr 2006 13:31:54 GMT, "The3rd Earl Of Derby" wrote: Mike Halmarack wrote: I bought a water heated towel rail from eBay. It has some dents in the lower horizontal rail. Does it look like I'd be able to heat the joints at both ends of the rail and rotate the dents to the back without losing the water seal? Also, would the flow be best going in at the top and return from the connection at the bottom? Here's a pictu www.gooseisland.plus.com TIA -- Regards, Mike Halmarack Drop the (EGG) to email me. so thats where me Zimmer went. ;-) I wish you' d've driven it more carefully. -- Regards, Mike Halmarack Drop the (EGG) to email me. Gawd! you got no taste man,what possesed you to buy that ugly thing? I thought red skirting and flooring went out of fashion in the 80's? -- Sir Benjamin Middlethwaite |
#5
Posted to uk.d-i-y
|
|||
|
|||
Towel rail repair and fitting advice needed.
On Sun, 09 Apr 2006 13:46:54 GMT, "The3rd Earl Of Derby"
wrote: Mike Halmarack wrote: On Sun, 09 Apr 2006 13:31:54 GMT, "The3rd Earl Of Derby" wrote: Mike Halmarack wrote: I bought a water heated towel rail from eBay. It has some dents in the lower horizontal rail. Does it look like I'd be able to heat the joints at both ends of the rail and rotate the dents to the back without losing the water seal? Also, would the flow be best going in at the top and return from the connection at the bottom? Here's a pictu www.gooseisland.plus.com TIA -- Regards, Mike Halmarack Drop the (EGG) to email me. so thats where me Zimmer went. ;-) I wish you' d've driven it more carefully. -- Regards, Mike Halmarack Drop the (EGG) to email me. Gawd! you got no taste man,what possesed you to buy that ugly thing? Now you tell me! I thought red skirting and flooring went out of fashion in the 80's? It's not really that modern. Nor is it red, except to my camera. -- Regards, Mike Halmarack Drop the (EGG) to email me. |
#6
Posted to uk.d-i-y
|
|||
|
|||
Towel rail repair and fitting advice needed.
In article , Mike
Halmarack ?.?.?.?@?.? writes I bought a water heated towel rail from eBay. It has some dents in the lower horizontal rail. Does it look like I'd be able to heat the joints at both ends of the rail and rotate the dents to the back without losing the water seal? Also, would the flow be best going in at the top and return from the connection at the bottom? Here's a pictu www.gooseisland.plus.com TIA Lots of thermal mass at both ends and no real idea of whether the joint is soft soldered or brazed. In summary, the chances of this not ending in tears are somewhere between zero and sweet very little at all. This is definitely one to forget about and move on, no one but you will know about the dents when they are covered in roasty toasty towels :-). -- fred Plusnet - I hope you like vanilla |
#7
Posted to uk.d-i-y
|
|||
|
|||
Towel rail repair and fitting advice needed.
On Sun, 09 Apr 2006 16:14:54 GMT, fred wrote:
In article , Mike Halmarack ?.?.?.?@?.? writes I bought a water heated towel rail from eBay. It has some dents in the lower horizontal rail. Does it look like I'd be able to heat the joints at both ends of the rail and rotate the dents to the back without losing the water seal? Also, would the flow be best going in at the top and return from the connection at the bottom? Here's a pictu www.gooseisland.plus.com TIA Lots of thermal mass at both ends and no real idea of whether the joint is soft soldered or brazed. In summary, the chances of this not ending in tears are somewhere between zero and sweet very little at all. You make a very convincing point. :-) This is definitely one to forget about and move on, no one but you will know about the dents when they are covered in roasty toasty towels :-). So true. -- Regards, Mike Halmarack Drop the (EGG) to email me. |
#8
Posted to uk.d-i-y
|
|||
|
|||
Towel rail repair and fitting advice needed.
On Sun, 09 Apr 2006 17:27:22 +0100, Mike Halmarack ... wrote:
Lots of thermal mass at both ends and no real idea of whether the joint is soft soldered or brazed. In summary, the chances of this not ending in tears are somewhere between zero and sweet very little at all. The Chrome would get discoloured too. You make a very convincing point. :-) I had one of those towel rails, it went in the skip last year, it looks kind of familiar ... The joints were however definitely brazed. This is definitely one to forget about and move on, no one but you will know about the dents when they are covered in roasty toasty towels :-). So true. nods DG |
#9
Posted to uk.d-i-y
|
|||
|
|||
Towel rail repair and fitting advice needed.
On Sun, 09 Apr 2006 18:39:37 +0100, Derek ^
wrote: On Sun, 09 Apr 2006 17:27:22 +0100, Mike Halmarack ... wrote: Lots of thermal mass at both ends and no real idea of whether the joint is soft soldered or brazed. In summary, the chances of this not ending in tears are somewhere between zero and sweet very little at all. The Chrome would get discoloured too. You make a very convincing point. :-) I had one of those towel rails, it went in the skip last year, it looks kind of familiar ... You could 've decked it out in a few fluffy towels before chucking it, cheapskate. Then again, if you look on some of the towel rail websites, you'll see that these classic style towel rails are more than twice the price of the modern ones, for very good reason. Practicality, some adherence to the 'form follows function' principle and a superior jointing system. The joints were however definitely brazed. My limited knowledge of brazing is that the colour of braze is yellowish. The joint lines on this towel rail are dull grey. This is definitely one to forget about and move on, no one but you will know about the dents when they are covered in roasty toasty towels :-). So true. nods DG -- Regards, Mike Halmarack Drop the (EGG) to email me. |
#10
Posted to uk.d-i-y
|
|||
|
|||
Towel rail repair and fitting advice needed.
On Sun, 09 Apr 2006 18:53:15 +0100, Mike Halmarack ... wrote:
The joints were however definitely brazed. My limited knowledge of brazing is that the colour of braze is yellowish. The joint lines on this towel rail are dull grey. Mine were definitely very hard and chromed over. 8-/ ? 'Spose it's possible the corner fittings were commonly available to the trade and were assembled into towell rails by all and sundry. If your tube got dented it might tend to indicate it was made of soft copper. Mine didn't maybe that indicates it was made of ... Summat Else. DG |
#11
Posted to uk.d-i-y
|
|||
|
|||
Towel rail repair and fitting advice needed.
You would have to apply so much heat to get all the joins undone at the
same time the chrome would look very second hand afterwards even worse the dents you have now |
#12
Posted to uk.d-i-y
|
|||
|
|||
Towel rail repair and fitting advice needed.
On 10 Apr 2006 05:09:54 -0700, "George Tingsley"
wrote: You would have to apply so much heat to get all the joins undone at the same time the chrome would look very second hand afterwards even worse the dents you have now Thanks George. From what you and others have written on the subject, it would seem foolhardy to attempt that adjustment. I'm going to tolerate the visibility of the dents. -- Regards, Mike Halmarack Drop the (EGG) to email me. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
need bathtub drain repair advice | Home Repair |