 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to uk.d-i-y
|
|||
|
|||
Is hole size standardised for window-mounted fans?
I want to replace an old Xpelair window fan (model FXC6) as it's too
powerful. See http://i1.ebayimg.com/01/i/06/9e/51/9d_1_b.JPG I believe it's called a "6 inch fan". The blade diameter is 6inches (150mm). The diameter of the circular hole in the window is 184mm (seven and a quarter inches). Is this hole diameter standardised so that a replacement "6inch/150mm fan" from BLOGGS & CO would be expected to fit a window hole of 184mm diameter? |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Size of worktop hole for hobs | UK diy | |||
| BIG HOLE, NO BRAINS, NEED ANSWER | Metalworking | |||
| Hydraulic Punch hole size question | Metalworking | |||
| Cosmetic Aluminum 'Hole Plugging' Help Needed | Metalworking | |||
| How straight are drilled holes? Was Need to drill 1" deep .138 hole Thank you! | Metalworking | |||
Linear Mode
