Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
switches in bathrooms
I would like switches for extractor fan / possibly electric shower /
lights in the bathroom. I don't want strings (too many) or switches outside (kids etc can switch them off when you're in there - its great fun !). Best solution - air switches or low volatage switches and relays ? Which is the best / most likely choice ? Or, I suppose a DIY mechanically isolated contraption. (Like a rope around a bicycle wheel or something). Any ideas ? Simon. |
#2
Posted to uk.d-i-y
|
|||
|
|||
switches in bathrooms
wrote in message oups.com... I would like switches for extractor fan / possibly electric shower / lights in the bathroom. I don't want strings (too many) or switches outside (kids etc can switch them off when you're in there - its great fun !). Best solution - air switches or low volatage switches and relays ? Which is the best / most likely choice ? Or, I suppose a DIY mechanically isolated contraption. (Like a rope around a bicycle wheel or something). Any ideas ? Simon. How many is too many? I can see you will only need two in you bathroom with a fan isolator outside the room. Regards Stephen |
#3
Posted to uk.d-i-y
|
|||
|
|||
switches in bathrooms
wrote in message oups.com... I would like switches for extractor fan / possibly electric shower / lights in the bathroom. I don't want strings (too many) or switches outside (kids etc can switch them off when you're in there - its great fun !). Best solution - air switches or low volatage switches and relays ? Which is the best / most likely choice ? Or, I suppose a DIY mechanically isolated contraption. (Like a rope around a bicycle wheel or something). Any ideas ? Simon. Our extractor fan switches itself on and off automatically, it's controlled by an humidistat. We're delighted with it! We leave the shower unit switched on all the time, the shower itself is then operated by the button on the unit. I wonder if something like the switch for some lavatory flush systems can be bought - the ones where you simply pass a hand over it without contact. Is that an air switch? Mary |
#4
Posted to uk.d-i-y
|
|||
|
|||
switches in bathrooms
On Sun, 26 Mar 2006 19:02:44 +0000, Stephen Dawson wrote:
wrote in message oups.com... I would like switches for extractor fan / possibly electric shower / lights in the bathroom. I don't want strings (too many) or switches outside (kids etc can switch them off when you're in there - its great fun !). Best solution - air switches or low volatage switches and relays ? Which is the best / most likely choice ? Or, I suppose a DIY mechanically isolated contraption. (Like a rope around a bicycle wheel or something). Any ideas ? Simon. How many is too many? I can see you will only need two in you bathroom with a fan isolator outside the room. Regards Stephen I beleive that provided the IP rating is adequate you can use non-pull-cord types. A suitable one would be an outside MK membrane type. -- Ed Sirett - Property maintainer and registered gas fitter. The FAQ for uk.diy is at http://www.diyfaq.org.uk Gas fitting FAQ http://www.makewrite.demon.co.uk/GasFitting.html Sealed CH FAQ http://www.makewrite.demon.co.uk/SealedCH.html Choosing a Boiler FAQ http://www.makewrite.demon.co.uk/BoilerChoice.html |
#6
Posted to uk.d-i-y
|
|||
|
|||
switches in bathrooms
wrote:
I would like switches for extractor fan / possibly electric shower / lights in the bathroom. I don't want strings (too many) or switches outside (kids etc can switch them off when you're in there - its great fun !). Best solution - air switches or low volatage switches and relays ? Which is the best / most likely choice ? Or, I suppose a DIY mechanically isolated contraption. (Like a rope around a bicycle wheel or something). Any ideas ? You neglect to mention the size of the bathroom. However you can have ordinary switches if you prefer as long as you can place them in Zone 3 (or outside the zones althgether if it is a big room). Same applies to the fan isolator. Note that it should not really be placed outside the room with the fan unless it is a type that can be locked off. If you are concerned about high levels of condensation on the switches then choose one witn a suitably high IP rating. -- Cheers, John. /================================================== ===============\ | Internode Ltd - http://www.internode.co.uk | |-----------------------------------------------------------------| | John Rumm - john(at)internode(dot)co(dot)uk | \================================================= ================/ |
#7
Posted to uk.d-i-y
|
|||
|
|||
switches in bathrooms
In article .uk,
Ed Sirett wrote: I beleive that provided the IP rating is adequate you can use non-pull-cord types. A suitable one would be an outside MK membrane type. We were looking at a house the other day, with a retrofitted en-suite shower. The neon on the pull switch was not lit, and it had been mounted on such a high ceiling that the mechanical ON/OFF indicator was difficult to see. For this sort of reason I dislike (distrust?) these pull-pull switches, so had a mild search for wall-mounted alternatives. There are a number of heavyweight wall-mounted rotary switches, meant for industrial use in wet areas. They provide a nice easy_to_see indication of ON/OFF. Are such switches defined as acceptable in wet areas in the domestic situation? -- Tony Williams. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Advice please - 3 way light switches - I just moved into an older house | Home Repair | |||
Earth on metal light switches? | UK diy | |||
Bathroom light switches - Location | Home Repair | |||
Double Pole switches and FCUs for kitchen applicances | UK diy | |||
How safe is it to short out pressure switches in central A/C conpressor? | Home Repair |