Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Capping hot water pipe
Hi
My current bathroom hot water piping enters the bathroom on a T joint, with one pipe going right angles to the sink and the other going straight on to the bath. I'm moving the bath towards the sink, and am able to run the bath off the same pipe as the sink. I was just going to cap the remaining pipe, but wondered whether this could cause stagnant water. The nearest place to cap it with relative ease is 1.3m from the T-joint. Is it okay to cap it there, or must I cap it a smaller distance from the T, or replace T-joint with an elbow? Last edited by The Count : January 6th 06 at 09:44 PM |
#2
Posted to uk.d-i-y
|
|||
|
|||
Capping hot water pipe
In an earlier contribution to this discussion,
The Count wrote: Hi My current bathroom hot water piping enters the bathroom on a T joint, with one pipe going right angles to the sink and the other going straight on to the bath. I'm moving the bath towards the sink, and am able to run the bath off the same pipe as the sink. I was just going to cap the remaining pipe, but wondered whether this could cause stagnant water. The nearest place to cap it with relative ease is 1.3m from the T-joint. Is it okay to cap it there, or must I cap it a smaller distance from the T, or replace T-joint with an elbow? By far the best thing would be to replace the tee with an elbow. Otherwise you will have some air trapped in the dead leg which may cause water hammer. It could be a breeding ground for bugs, too. -- Cheers, Set Square ______ Please reply to newsgroup. Reply address is invalid. |
#3
Posted to uk.d-i-y
|
|||
|
|||
Capping hot water pipe
Set Square wrote:
By far the best thing would be to replace the tee with an elbow. Otherwise you will have some air trapped in the dead leg which may cause water hammer. Is that right? Never done it myself, but I always thought that *introducing* a dead leg containing air was a *cure* for water hammer (due to the compressibility of the air acting as a cushion against oscillations in the water? David |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Detergents and cleaners FAQ | UK diy | |||
A/C Drainage Pipe clogged... water backing up into hallway | Home Repair | |||
A/C Drainage Pipe clogged... water backing up into hallway | Home Repair | |||
electricity on my water pipes | Home Repair | |||
Hot product for hot water ...products compaed | Home Repair |