Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to uk.d-i-y
|
|||
|
|||
Any RF types out there. Needs -.- more power at 400 Mhz!
In article ,
dave wrote: I have one of these gizmos from Maplin that allows you to turn on a 13A socket using a remote control box. It works quite well but the range is optimistic at 25 yards :-) Just wondered if there is some simple tweak I can do to up the xmitter power just a teensie-weensie amount to get a little extra range? Some form of reflector to make the aerial directional. -- *You're just jealous because the voices only talk to me * Dave Plowman London SW To e-mail, change noise into sound. |
#2
Posted to uk.d-i-y
|
|||
|
|||
Any RF types out there. Needs -.- more power at 400 Mhz!
In article , Dave Plowman (News)
writes In article , dave wrote: I have one of these gizmos from Maplin that allows you to turn on a 13A socket using a remote control box. It works quite well but the range is optimistic at 25 yards :-) Just wondered if there is some simple tweak I can do to up the xmitter power just a teensie-weensie amount to get a little extra range? Some form of reflector to make the aerial directional. That is quite sensible as to mess around with the aerial it already has may well de-tune it all and make it less "good" that what it was... -- Tony Sayer |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Brown's gas?? | Metalworking | |||
retrofitting an ATX psupply into a microATX psupply box - won't power | Electronics Repair | |||
need help tracing power circuit on laptop | Electronics Repair | |||
Power cost of idle electric water heater | Home Repair | |||
Generator FAQ | Metalworking |