my conservatory sockets are on there own 32amp mcb direct in consumer
unit with the lights fused spured (3amp) off the sockets but nothing
now works please advise


--
leon

leon wrote:
my conservatory sockets are on there own 32amp mcb direct in consumer
unit with the lights fused spured (3amp) off the sockets but nothing
now works please advise

I dont see how anyone could with so little info. I assume youve
switched the mcb back on. And the RCD if its a split CU. For any more
you'd need to give us a clue.

NT

In message , leon
writes

my conservatory sockets are on there own 32amp mcb direct in consumer
unit with the lights fused spured (3amp) off the sockets but nothing
now works please advise


Get a man in

or give some useful information

.... and ditch diybanter

--
geoff

raden wrote:

In message , leon
writes

my conservatory sockets are on there own 32amp mcb direct in consumer
unit with the lights fused spured (3amp) off the sockets but nothing
now works please advise

Get a man in

or give some useful information

... and ditch diybanter

This appears to be yet another 'board' homeimprovementbanter.com - or has
diybanter changed its name?

"leon" wrote in message
...

my conservatory sockets are on there own 32amp mcb direct in consumer
unit with the lights fused spured (3amp) off the sockets but nothing
now works please advise

- --
leon
Replying to the scanty info given by OP, before resetting MCB (and a
possible master RCD) check around whole ring wiring route for any signs of
humidity or of possible interference by vermin.
As the lighting is a spurred subsidiary (rather naughty) of the power ring
in this area, until the utilities cct is restored, you obviously will not
get any lights.
Jim

"leon" wrote in message
...

my conservatory sockets are on there own 32amp mcb direct in consumer
unit with the lights fused spured (3amp) off the sockets but nothing
now works please advise


--
leon

I would advise you to be more precise as that doesn't tell us anything.
does the ciruit breaker trip when nothing is plugged in, when items are
plugged in or is there just no power and how have you tested this?