Hi,

We are looking for some 1 1/4" (32mm) chrome/stainless steel saddle
pipe clips.

We have an exposed waste for a cloakroom sink and we have chrome 1 1/4"
pipe and fittings (all rediculasly expensive themselves!) and have
even found 1 1/4" chrome munsen ring clips but with the backplates
installed they stand the pipe off the wall a long way.

We also have exposed 15mm chrome pipe for the hot/cold water and have
found 15mm chrome saddle clips for these, but not in the larger size.

Can anyone help?

In article . com,
says...
Hi,

We are looking for some 1 1/4" (32mm) chrome/stainless steel saddle
pipe clips.

We have an exposed waste for a cloakroom sink and we have chrome 1 1/4"
pipe and fittings (all rediculasly expensive themselves!) and have
even found 1 1/4" chrome munsen ring clips but with the backplates
installed they stand the pipe off the wall a long way.


If you already have the Munsen rings could you countersink the stem and
fix through with a single screw?

Many thanks and you know what, I was looking at them last night and
noticed that the internal stem is counter sunk itself so will take a
countersunk screw head. I did not realise at first that you could mount
the ring without the backplane.

This should to this trick nicely. I think I will change the 15mm saddle
clips to match as well.