 |
|
| UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
How to Terminate Network Cables
Hi all
Is it possible to DIY an RJ45 plug straight onto the end of Cat 5 network cable? I intend to install an 8 port switch in the loft, but don't feel that my install warants a patch panel. Wanted to stick RJ45 "ends" straight on the cable and plug this into switch - bit of a bodge I know, but don't want to go to the hassle/expense of patch panel, patch leads etc. If these are available, can anyone point me to supplier and fitting method please? TIA Phil |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Off topic-question about newsgroups | Metalworking | |||
| How Dish Network Setup 4 Receivers in a House? | Home Repair | |||
| How to Run Network Cable in an Old House? | Home Repair | |||
| Burying cables in wall - protection against nails etc. | UK diy | |||
Threaded Mode
