Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Mystery 3rd Pipe
The people who owned my house before me had the water tank(s) in the attic
disconnected and a combi boiler installed. We now have three pipes capped halfway up the wall in the 2nd bedroom, which for obvious reasons I want to remove ! Two of these are obviously hot and cold (15mm) water pipes, one of which I've removed. The 3rd is a pretty wide pipe (well a lot bigger than 22mm anyway). Does anyone have any idea what it might be ? Would it be gas ? (I'm guessing the boiler used to be in this room) Also I've noticed the pipe I've not removed is still connected to the mains (guess how I know that!), is it wise to cap it off under the floorboards, or would it be better to get it removed from where it joins the main (used?) piping in the house ? Thanks Séan |
#2
|
|||
|
|||
Séan Connolly wrote:
The people who owned my house before me had the water tank(s) in the attic disconnected and a combi boiler installed. We now have three pipes capped halfway up the wall in the 2nd bedroom, which for obvious reasons I want to remove ! Two of these are obviously hot and cold (15mm) water pipes, one of which I've removed. The 3rd is a pretty wide pipe (well a lot bigger than 22mm anyway). Does anyone have any idea what it might be ? Too big for gas - could it have been the feed/return to the cylinder? |
#3
|
|||
|
|||
Too big for gas - could it have been the feed/return to
the cylinder? Not sure what you mean ? |
#4
|
|||
|
|||
Séan Connolly wrote:
Too big for gas - could it have been the feed/return to the cylinder? Not sure what you mean ? The hot water cylinder. |
#5
|
|||
|
|||
Too big for gas - could it have been the feed/return to
the cylinder? Not sure what you mean ? The hot water cylinder. Sorry my knowledge on these matters is pretty limited, I didn't understand what you ment by feed/return. |
#6
|
|||
|
|||
In message , Séan
Connolly writes The people who owned my house before me had the water tank(s) in the attic disconnected and a combi boiler installed. We now have three pipes capped halfway up the wall in the 2nd bedroom, which for obvious reasons I want to remove ! Two of these are obviously hot and cold (15mm) water pipes, one of which I've removed. The 3rd is a pretty wide pipe (well a lot bigger than 22mm anyway). Does anyone have any idea what it might be ? Would it be gas ? (I'm guessing the boiler used to be in this room) Also I've noticed the pipe I've not removed is still connected to the mains (guess how I know that!), is it wise to cap it off under the floorboards, or would it be better to get it removed from where it joins the main (used?) piping in the house ? Thanks Séan Whenever I've seen big fat pipes, they have usually been connections between the radiators in an old C/H system. -- Richard Faulkner |
#7
|
|||
|
|||
Whenever I've seen big fat pipes, they have usually been connections
between the radiators in an old C/H system. Actually here the rad pipes are 10mm |
#8
|
|||
|
|||
Séan Connolly wrote:
Too big for gas - could it have been the feed/return to the cylinder? Not sure what you mean ? The hot water cylinder. Sorry my knowledge on these matters is pretty limited, I didn't understand what you ment by feed/return. Ah - it might have been the big pipe coming from the boiler that takes hot water to the cylinder, or the big pipe returning to the boiler from the cylinder. If the boiler or cylinder have been replaced/moved, there might be some left-overs. |
#9
|
|||
|
|||
Séan Connolly wrote:
Too big for gas - could it have been the feed/return to the cylinder? Not sure what you mean ? The hot water cylinder. Sorry my knowledge on these matters is pretty limited, I didn't understand what you ment by feed/return. In many older systems where gravity fed primaries were used, it was common to use 28mm pipe between the boiler and the hot water cylinder. |
#10
|
|||
|
|||
S=E9an Connolly wrote: The people who owned my house before me had the water tank(s) in the attic disconnected and a combi boiler installed. We now have three pipes capped halfway up the wall in the 2nd bedroom, which for obvious reasons I want = to remove ! Two of these are obviously hot and cold (15mm) water pipes, one= of which I've removed. The 3rd is a pretty wide pipe (well a lot bigger than 22mm anyway). Does anyone have any idea what it might be ? Would it be = gas ? (I'm guessing the boiler used to be in this room) Also I've noticed the pipe I've not removed is still connected to the mai= ns (guess how I know that!), is it wise to cap it off under the floorboards,= or would it be better to get it removed from where it joins the main (used?) piping in the house ? Thanks =20 S=E9an It's most likely the 28mm pipe coming from the old tank. |
#11
|
|||
|
|||
snip
thanks for all the ideas S |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
In Deep Sh*t.... | UK diy | |||
electricity on my water pipes | Home Repair | |||
Replacing old steel water main supply pipe | UK diy | |||
Sewer line replacement | Home Ownership | |||
Mystery pipe | UK diy |