Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Consumer unit replacement / Certification
I will soon be replacing an existing consumer unit with a new unit and the
new unit will be located about 1 metre from its present position. This will require the various circuit cables to be shortened but no other changes will be made to circuits. Also the existing tails from the meter to the new unit will need to be extended (actually replaced with new) by 1 metre to reach the consumer unit position. Total length of the new tails will be about 2.5 metres. Bearing in mind that no circuit changes are to be made, can anybody tell me if I need to provide some form of certification for the electricity board people (nPower) who will connect the new tails from the meter to the consumer unit? Tia, Cic. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
consumer unit mounting board | UK diy | |||
Hunter ceiling fan replacement switch -- do I snip wires and stab into new unit? | Home Repair | |||
Fitting a Wylex Consumer unit with spur to shed | UK diy | |||
old circuits, new consumer unit | UK diy | |||
F&G Concept 2000 Consumer Unit Live Busbar Query | UK diy |