UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
crb
 
Posts: n/a
Default Don't leave neat bleach in a stainless steel sink

Perhaps I'm the only one that did not know about bleach and stainless
steel incompatability, but I've now learned an expensive lesson. Just
prior to going away for 2 weeks, I put a liberal dose of neat bleach in
the kitchen stainless steel sink. On my return, I found that the
bleach had eaten clean through the sink, leaving a 10mm x 5 mm hole
through to the cupboard below. It also had eaten through the plug
chain, which came apart in my hand as I pulled the plug out.

CRB

  #2   Report Post  
 
Posts: n/a
Default

crb wrote:
Perhaps I'm the only one that did not know about bleach and stainless
steel incompatability, but I've now learned an expensive lesson. Just
prior to going away for 2 weeks, I put a liberal dose of neat bleach in
the kitchen stainless steel sink. On my return, I found that the
bleach had eaten clean through the sink, leaving a 10mm x 5 mm hole
through to the cupboard below. It also had eaten through the plug
chain, which came apart in my hand as I pulled the plug out.

CRB


dont feed the troll

NT

  #3   Report Post  
Newshound
 
Posts: n/a
Default

dont feed the troll

NT

Well, I've never seen anything quite like that in a stainless steel sink.
But I have seen pictures of quite substantial high alloy steel structures
that have been eaten by stress corrosion cracking, caused by chloride.


  #4   Report Post  
Badger
 
Posts: n/a
Default

Newshound wrote:

dont feed the troll

NT


Well, I've never seen anything quite like that in a stainless steel sink.
But I have seen pictures of quite substantial high alloy steel structures
that have been eaten by stress corrosion cracking, caused by chloride.


Hummm, we spill 100% twaddle caustic on stainless sometimes, never seen
any holes, eats aluminium though.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Appliances-Brushed steel Vs Stainless steel DIY Novice UK diy 7 August 24th 04 06:44 PM
Etching 304 Stainless Steel with Ferric Chloride Problems Jon Lorber Metalworking 11 April 8th 04 12:43 AM
MIG and 304 stainless steel Carl Ijames Metalworking 1 October 2nd 03 04:26 AM
Satin finish Fridge & Stainless Steel Appliances OK? calberto Home Ownership 1 September 8th 03 12:35 AM
Stainless steel sink - cleaning Ed UK diy 18 September 4th 03 11:07 AM


All times are GMT +1. The time now is 04:54 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"