The windows here are UPVC with the dual position opening.
I've just fitted roller blinds and there's not much chance of using them
when the side hinged opening option is in use but it'd be nice to have a
clear drop for the blind when the windows are hinging at the bottom and
opening inward at the top.
Trouble is, the windows open inward too far and looking at the integral
metal stay that limits the opening amount, there doesn't seem to be any
shortening adjustment available. Can anyone tell me if I'm missing an
obvious way to adjust the degree of opening?

I suppose I could put a folding window stop in the reveal but I'd rather
minimise the bits and pieces of external hardware if possible.
If it's going to have to be the external stop, can anyone please tell me
where I can buy the folding brass type. or what the proper name for them
is?

--
Tony Halmarack

"Tony Halmarack" wrote in message
...
The windows here are UPVC with the dual position opening.
I've just fitted roller blinds and there's not much chance of using them
when the side hinged opening option is in use but it'd be nice to have a
clear drop for the blind when the windows are hinging at the bottom and
opening inward at the top.
Trouble is, the windows open inward too far and looking at the integral
metal stay that limits the opening amount, there doesn't seem to be any
shortening adjustment available. Can anyone tell me if I'm missing an
obvious way to adjust the degree of opening?

I suppose I could put a folding window stop in the reveal but I'd rather
minimise the bits and pieces of external hardware if possible.
If it's going to have to be the external stop, can anyone please tell me
where I can buy the folding brass type. or what the proper name for them
is?

--
Tony Halmarack

A piece of small link chain cut to the length you need with a couple of nice
washers or screw caps and a couple of small self tapping screws, long enough
to go through the washer the chain and not to far through the UPVc. Fit one
end of chain to the surface of the outer frame and the other end to opening
frame. Now the window can't be opened any further than chain allows.


---
BigWallop

http://basecuritysystems.no-ip.com

Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.495 / Virus Database: 294 - Release Date: 30/06/03

On Sat, 05 Jul 2003 14:56:23 GMT, "BigWallop"
wrote:


A piece of small link chain cut to the length you need with a couple of nice
washers or screw caps and a couple of small self tapping screws, long enough
to go through the washer the chain and not to far through the UPVc. Fit one
end of chain to the surface of the outer frame and the other end to opening
frame. Now the window can't be opened any further than chain allows.


---
BigWallop

That's an interesting possibility, with some adjustment potential. Thanks
for the tip.
--
Tony Halmarack

I assume you are talking tilt and turn windows,There is a safety issue hear
if you use some form of stay to restrict the opening you will also restrict
the ability to open window in emergency.

Have been all round this one with customers who hate these type of windows,
there is no way round it leave it as designed or change the window style.The
consequences could be severe

"alex" wrote in message
...
I assume you are talking tilt and turn windows,There is a safety issue
hear
if you use some form of stay to restrict the opening you will also
restrict
the ability to open window in emergency.

Have been all round this one with customers who hate these type of
windows,
there is no way round it leave it as designed or change the window
style.The
consequences could be severe



But if the chain is fitted on the hinge side, then it wont restrict the
window from opening right up like a door, it'll only restrict it from
tilting in as far. Your thoughts are not thought out enough me'thinks.