Home |
Search |
Today's Posts |
|
UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Making electrical connection to thermostat contacts
I'm planning on using one of these thermostats:
http://img-europe.electrocomponents....C561460-01.jpg to control the extractor fan in my bathroom. The idea is to put the thermostat on the hot pipe going to the shower so that when the shower is turned on it triggers the fan. I'm planning to use 1.5mm twin and earth to make the connection between the fan and the thermostat, which I think should be more than adequate. But how should I connect the cable to those contacts on the thermostat? [By the way, the thermostat is from http://rswww.com part no 250-6106] |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help! Interapid 312B-1 contact point questions | Metalworking | |||
Philips 10PR21C1 (old model) Antenna Connection Problem | Electronics Repair | |||
Earth Bondng | UK diy | |||
Pearl Harbor | Metalworking | |||
Toronto area lumber? | Woodworking |