UK diy (uk.d-i-y) For the discussion of all topics related to diy (do-it-yourself) in the UK. All levels of experience and proficency are welcome to join in to ask questions or offer solutions.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
 
Posts: n/a
Default How many cables should there be in a fused switch?

I'm busy replacing some sockets in a house we bought recently.

In one of the rooms there's a fused switch on the mains circuit that
has 3 cables attached to the supply (one feeding a spurred socket just
next to it) and 1 cable on the load feeding an outside PIR security
light. We think it's feeding the light as it doesn't work anyway and I
haven't checked why yet. It could just be the bulb. However the light
is in line with the switch so that's what we're guessing.

Anyway from my limited knowledge, a normal socket would have a max of 3
cables in it so can the fused switch in effect have a total of 4 in it?

Thanks

Anth

  #2   Report Post  
Christian McArdle
 
Posts: n/a
Default

Anyway from my limited knowledge, a normal socket would have a max of 3
cables in it so can the fused switch in effect have a total of 4 in it?


A single socket could have 4 cables from it, if you include the one
attaching to the plug on the front. Effectively it is the same thing.
There's no problem on an FCU having two supplies and a spur off cable on the
supply side.

Christian.


  #3   Report Post  
Andrew Gabriel
 
Posts: n/a
Default

In article ,
"Christian McArdle" writes:
Anyway from my limited knowledge, a normal socket would have a max of 3
cables in it so can the fused switch in effect have a total of 4 in it?


A single socket could have 4 cables from it, if you include the one
attaching to the plug on the front. Effectively it is the same thing.
There's no problem on an FCU having two supplies and a spur off cable on the
supply side.


You can have more than one spur taken from it too, subject to
considering the spacing out of loading around the ring, the
cable capacity in the connectors, and the space for the cable
in the back box.

--
Andrew Gabriel
  #4   Report Post  
Christian McArdle
 
Posts: n/a
Default

You can have more than one spur taken from it too, subject to
considering the spacing out of loading around the ring, the
cable capacity in the connectors, and the space for the cable
in the back box.


I would only do this if the point load can be guaranteed to remain below 20A
(and preferably 13A), though. Spuring off in this manner would be fine for a
light and a television aerial booster, but highly suspect for a washing
machine and tumble dryer.

Christian.


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
GE Fused Disconnect Problems Jeff Wisnia Home Repair 44 January 13th 05 11:22 PM
3 way switch disaster (long but interesting) RB Home Repair 8 July 23rd 04 02:18 PM
kenmore 90 series washer - lid switch removal secrets (for changing it)? bill yohler Home Repair 2 March 13th 04 04:19 PM
Two switch stairway light wiring question Dan Home Repair 6 February 7th 04 04:19 PM
Dimmer switch on ceiling barry martin Home Repair 1 December 21st 03 01:42 PM


All times are GMT +1. The time now is 06:43 AM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004-2025 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"