Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Brown & Sharpe No. 2 Grinder-need help
Have aquired a B&S No. 2 Grinder. This is an old belt driven automatic
that is missing the belt/belts. From what I can determine there are two belts to this grinder, one for the spindle (on a counter-weight) and one for the table/cross-slide feed drive. I need to know the belt numbers and there appears to be a tensioner (that is missing) for the table feed. Any help would be appreciated. James |
#2
|
|||
|
|||
I too have a B&S No. 2. Mine is belt driven and still has the old belts.
It's a machine that I am going to refurbish, and while I have owned it for about 5 years, I've never turned it on. I purchased a manual from B&S (extremely expensive) and I am willing to send you the appropriate page(s) to get you going. I can either photocopy/mail or scan/email. Tell me what you wish. Ivan Vegvary, Oregon "Dermako" wrote in message oups.com... Have aquired a B&S No. 2 Grinder. This is an old belt driven automatic that is missing the belt/belts. From what I can determine there are two belts to this grinder, one for the spindle (on a counter-weight) and one for the table/cross-slide feed drive. I need to know the belt numbers and there appears to be a tensioner (that is missing) for the table feed. Any help would be appreciated. James |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
WTB: # 6 Brown & Sharpe Dead Center | Metalworking | |||
OT - Christians defend GWB | Metalworking | |||
Brown & Sharpe 746 vest pocket speed indicator | Metalworking | |||
Brown & Sharpe Calipers | Metalworking | |||
Brown & Sharpe surface grinder info | Metalworking |