Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
More Foundry Work - Posted
This section has a bit of wood work, but the new practices are etching
and priming the castings with a Zinc Chromate base coat... http://www.theworkshop.ca/casting/Fo...14/Fndry14.htm Frank www.theworkshop.ca |
#2
|
|||
|
|||
On 2005-03-28, Frank wrote:
This section has a bit of wood work, but the new practices are etching and priming the castings with a Zinc Chromate base coat... You might enjoy this: http://home.c2i.net/metaphor/mvpage.html Melting/casting with a microwave oven. -- Ben Jackson http://www.ben.com/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Plagiarism | Woodturning | |||
How to find a good contractor? | Home Repair | |||
Electrical work - would inspector check previously done work? | Home Repair | |||
Moisture Cure Urethane (Moisture Cured Urethane) | Woodworking | |||
Garage Door Work question | Home Ownership |