 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Clausing 8540or 5900 Speed Control Return Spring
Are there any tricks or gotchas to inspecting or removing the spring inside
the variable speed control handle on these mills. It looks like it uses the same spring and hub as the 5900 lathes in case anyone has experience with those. Judging from the force it imparts when the speed control handle returns, I'm guessing that it needs a little care when working on it and I have no desire to repeat an unfortunate experience I once had with a garage door spring. Mike. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| speed control for electric motors | Metalworking | |||
| Central Heating Mid-position valve - should it return using spring | UK diy | |||
| return spring for rockwell quill | Metalworking | |||
| Pond pump speed control | UK diy | |||
| Router Speed Control - How does this work? | Metalworking | |||
Threaded Mode
