 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Flaring brass tube????
Short simple question. I have some 6 mm wide brass tube (0.5mm wall
thickness) They're to used for an engine mount on a model. I want to know how to flare the ends. Not a flat washer type but two bell shapes either end of this tube. Making it 8mm either end. Many thanks. TR |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| rolling a bead on tube ends | Metalworking | |||
| Tech Review: Victor's (8liners/Genao) Replacement Arcade RGB Monitor Chassis (LONG) | Electronics Repair | |||
| brass brazing with a large propane torch | Metalworking | |||
| metal tubes | Metalworking | |||
| Re; Tube coping | Metalworking | |||
Threaded Mode
