Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Milling machine arbor
I have a 7/8" milling machine arbor I can't identify. It generally looks
like the NMTB arbors in the MSC catalog, but the shoulder between the taper and the arbor shaft is much thicker, about 1 inch, with a cross keyway on the back(Taper side). The taper is about 1.216 at the big end, about .714 at the small end and 2 inches long. the drawbar thread is 3/8 NC. I'm guessing its in the NMTB series but smaller than 30. Anybody know what this is? can anybody use it? John |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Self-Reproducing Machine Tools | Metalworking | |||
Seeking Milling Machine Set-up Advice | Metalworking | |||
newbie with milling machine | Metalworking | |||
Milling machine test. | Metalworking | |||
milling arbors | Metalworking |