Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
here is my weedend project
Well I finally got around to having a couple days to myself. I spent it
making this rack to get my steel off a bench table. http://www.metalworking.com/dropbox/steel_rack.txt http://www.metalworking.com/dropbox/steel_rack.JPG http://www.metalworking.com/dropbox/steel_rack_1.JPG http://www.metalworking.com/dropbox/steel_rack_2.JPG Not much but it gave me a day to play with my Miller 175. Now I have my 135 up for sale as long as I don't need that one .. Pictured in the rack is not the steel I am talking about. This is the steel http://www.metalworking.com/dropbox/...eel_rack_4.JPG http://www.metalworking.com/dropbox/...eel_rack_3.JPG There may be a chance I might get organized. NOT!! Don D. |
#2
|
|||
|
|||
Don D. wrote:
Well I finally got around to having a couple days to myself. I spent it making this rack to get my steel off a bench table. http://www.metalworking.com/dropbox/steel_rack.txt http://www.metalworking.com/dropbox/steel_rack.JPG http://www.metalworking.com/dropbox/steel_rack_1.JPG http://www.metalworking.com/dropbox/steel_rack_2.JPG Not much but it gave me a day to play with my Miller 175. Now I have my 135 up for sale as long as I don't need that one Nice. How much did the entire rack project cost you in materials and consumables? - GWE |
#3
|
|||
|
|||
4 casters $15.00
1 20' 1/2 sq $7.?? Bed frames FREEBEE'S 4' 3/4 sq, left over scrap 24 x 48 expanded metal, left over about $7.?? 1 spray can Primer and 2 spray cans paint flat black $6.?? 2 days: prep, cutting, welding, painting all mig welded... Total $35.00 OH my god now I figured out I spent to much money on that... Thanks alot, I had no idea before this... ........................ Just kidding I hope that is what you wanted. Don D. "Grant Erwin" wrote in message ... Don D. wrote: Well I finally got around to having a couple days to myself. I spent it making this rack to get my steel off a bench table. http://www.metalworking.com/dropbox/steel_rack.txt http://www.metalworking.com/dropbox/steel_rack.JPG http://www.metalworking.com/dropbox/steel_rack_1.JPG http://www.metalworking.com/dropbox/steel_rack_2.JPG Not much but it gave me a day to play with my Miller 175. Now I have my 135 up for sale as long as I don't need that one Nice. How much did the entire rack project cost you in materials and consumables? - GWE |
#4
|
|||
|
|||
Now ask yourself how much you'd sell it for, in other words how much real
actual value it has for YOU? I bet it's way more than $35. A little while ago I built a rack for storing steel. Mine was a little different, and I didn't paint mine. I think I got my cost under $10. http://www.metalworking.com/dropbox/ScrapRack.txt http://www.metalworking.com/dropbox/...BeingBuilt.jpg http://www.metalworking.com/dropbox/ScrapRackDone.jpg My shop is a *much* better place to work with all that scrap neatly piled onto a rack! GWE Don D. wrote: 4 casters $15.00 1 20' 1/2 sq $7.?? Bed frames FREEBEE'S 4' 3/4 sq, left over scrap 24 x 48 expanded metal, left over about $7.?? 1 spray can Primer and 2 spray cans paint flat black $6.?? 2 days: prep, cutting, welding, painting all mig welded... Total $35.00 OH my god now I figured out I spent to much money on that... Thanks alot, I had no idea before this... ........................ Just kidding I hope that is what you wanted. Don D. "Grant Erwin" wrote in message ... Don D. wrote: Well I finally got around to having a couple days to myself. I spent it making this rack to get my steel off a bench table. http://www.metalworking.com/dropbox/steel_rack.txt http://www.metalworking.com/dropbox/steel_rack.JPG http://www.metalworking.com/dropbox/steel_rack_1.JPG http://www.metalworking.com/dropbox/steel_rack_2.JPG Not much but it gave me a day to play with my Miller 175. Now I have my 135 up for sale as long as I don't need that one Nice. How much did the entire rack project cost you in materials and consumables? - GWE |
#5
|
|||
|
|||
Grant
The rack is worth way more to me than 35.00 but I would not pay that much more if I had to buy one, knowing I can build it my self. Every thing is getting into one place now instead of looking in different places saying "I know I saw it someplace or here before" I personally like to be a little organized so I do not spend my time looking for things al the time. Plus the neighbors don't bitch so much....... Now my wife on the other hand, that is a different story. "Why do you have so much JUNK on the side of the house" I just ask her to leave this side, because this in my corner, She has the rest of the house. Don D. "Grant Erwin" wrote in message ... Now ask yourself how much you'd sell it for, in other words how much real actual value it has for YOU? I bet it's way more than $35. A little while ago I built a rack for storing steel. Mine was a little different, and I didn't paint mine. I think I got my cost under $10. http://www.metalworking.com/dropbox/ScrapRack.txt http://www.metalworking.com/dropbox/...BeingBuilt.jpg http://www.metalworking.com/dropbox/ScrapRackDone.jpg My shop is a *much* better place to work with all that scrap neatly piled onto a rack! GWE Don D. wrote: 4 casters $15.00 1 20' 1/2 sq $7.?? Bed frames FREEBEE'S 4' 3/4 sq, left over scrap 24 x 48 expanded metal, left over about $7.?? 1 spray can Primer and 2 spray cans paint flat black $6.?? 2 days: prep, cutting, welding, painting all mig welded... Total $35.00 OH my god now I figured out I spent to much money on that... Thanks alot, I had no idea before this... ........................ Just kidding I hope that is what you wanted. Don D. "Grant Erwin" wrote in message ... Don D. wrote: Well I finally got around to having a couple days to myself. I spent it making this rack to get my steel off a bench table. http://www.metalworking.com/dropbox/steel_rack.txt http://www.metalworking.com/dropbox/steel_rack.JPG http://www.metalworking.com/dropbox/steel_rack_1.JPG http://www.metalworking.com/dropbox/steel_rack_2.JPG Not much but it gave me a day to play with my Miller 175. Now I have my 135 up for sale as long as I don't need that one Nice. How much did the entire rack project cost you in materials and consumables? - GWE |
#6
|
|||
|
|||
On Tue, 22 Feb 2005 07:05:55 -0700, the inscrutable "Don D."
spake: 4 casters $15.00 1 20' 1/2 sq $7.?? Wow, I was just quoted $29.90 for a 20' stick of 1/2" square tubing at the local scrap metal yard. After seeing your price, I called another local steel shop and they get $9.21 for it. I should have brought those 2 bed frames up here with me when I moved. This welder is on wheels but the consumables aren't handy. I found that the hand-held mask from HF that came with the welder was useless and Icouldn't see squat, so I made another trek to HF for the $49 special. What a difference! I'll be pop-riveting a leather piece over the top to help more with the light since I'm welding outside now. ://www.metalworking.com/dropbox/steel_rack_2.JPG I just build similarly configured rack out of wood for my woodworking clamps. All 60 fit, with room to spare! -- ************************************************** ********* "Boy, I feel safer now that Martha Stewart is behind bars! O.J. is walking around free, Osama Bin Laden too, but they take the one woman in America willing to cook and clean and work in the yard and haul her ass to jail." --Tim Allen ************************************************** ********* |
#7
|
|||
|
|||
On 2005-02-22, Don D. wrote:
Well I finally got around to having a couple days to myself. I spent it making this rack to get my steel off a bench table. Yes, the best way to store steel is to weld it into a project. -- Ben Jackson http://www.ben.com/ |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Complicated Project (Hydraulics & More) | Metalworking | |||
WANTED: 50hp Phase Converters - - - Tax Deductible - - EAGLE SCOUT Gov't Service Project | Metalworking | |||
Latest project: Civil War Cannon carriage | Woodworking | |||
Update on water main project | Home Ownership |