 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Hurco Hawk knee mill
On Wed, 16 Feb 2005 06:22:41 GMT, 123 wrote:
You can have my weapons when you pry them from the fingers of my cold dead body ! Who gets the Viagra? -- Cliff |
|
#2
|
|||
|
|||
|
On Wed, 16 Feb 2005 08:59:20 -0500, Cliff wrote:
On Wed, 16 Feb 2005 06:22:41 GMT, 123 wrote: You can have my weapons when you pry them from the fingers of my cold dead body ! Who gets the Viagra? Well Cliff you deserve that award, Who gets the Viagra? Cliff Wins You seem to stroke every post in this group. If the guy already has Mastercam (or any Cam system) why bother with the Hurco DXF option ? Hopefully he has a legitimate version of a Cam software and when he needs support he can call in for help. You can have my weapons when you pry them from the fingers of my cold dead body ! |
|
#3
|
|||
|
|||
|
Cliff wrote:
On Wed, 16 Feb 2005 06:22:41 GMT, 123 wrote: You can have my weapons when you pry them from the fingers of my cold dead body ! Who gets the Viagra? Notice they be prying his fingers ? His fingers be stiff , is this a side effect of overdosing on viagra ? |
|
#4
|
|||
|
|||
|
On Thu, 17 Feb 2005 14:15:09 +1100, myal dumaree@hotmail said:
Cliff wrote: On Wed, 16 Feb 2005 06:22:41 GMT, 123 wrote: You can have my weapons when you pry them from the fingers of my cold dead body ! Who gets the Viagra? Notice they be prying his fingers ? His fingers be stiff , is this a side effect of overdosing on viagra ? Only if you are giving someone the finger. (or fingering someone:-) n. |
|
#5
|
|||
|
|||
|
On Thu, 17 Feb 2005 03:04:57 GMT, 123 wrote:
On Wed, 16 Feb 2005 08:59:20 -0500, Cliff wrote: On Wed, 16 Feb 2005 06:22:41 GMT, 123 wrote: You can have my weapons when you pry them from the fingers of my cold dead body ! Who gets the Viagra? Well Cliff you deserve that award, I don't want Gunner's stuff G. Who gets the Viagra? Cliff Wins You seem to stroke every post in this group. A few G. If the guy already has Mastercam (or any Cam system) Does he? why bother with the Hurco DXF option ? What "Hurco DXF option"? IIRC He asked about something else and said that *all* he had was the "Hurco standard program" (which I would assume to be their "conversational"). BTW, As he just got the machine I don't belerve it. IF it has an EIA-232 connector (or two) (they look like Mil-spec conectors BTY - you need to make special connectors for them as I recall) I think he has the capability of standard code, as from a postprocessor, as well. And I saw his later post after writing this g. Hopefully he has a legitimate version of a Cam software and when he needs support he can call in for help. Hope he got the Hurco manuals for the machine. You can have my weapons when you pry them from the fingers of my cold dead body ! Viagra ads are funny. -- Cliff |
|
#6
|
|||
|
|||
|
On Thu, 17 Feb 2005 14:15:09 +1100, myal dumaree@hotmail wrote:
Cliff wrote: On Wed, 16 Feb 2005 06:22:41 GMT, 123 wrote: You can have my weapons when you pry them from the fingers of my cold dead body ! Who gets the Viagra? Notice they be prying his fingers ? His fingers be stiff , is this a side effect of overdosing on viagra ? Stiff you say? -- Cliff |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Knee mill CNC retrofit using Anaheim | Metalworking | |||
| Moving a knee mill into basement | Metalworking | |||
| (mis)adventures moving a Nichols mill | Metalworking | |||
| Knee mill motor problem... sigh. | Metalworking | |||
| MicroCut knee mill? | Metalworking | |||
Linear Mode
