 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Cutting open old LO2 tank.
I have been asked to cut open an old liquid oxygen tank with my plasma
cutter. The intention is to use it as a glory hole for glasswork. I have not actually looked at the tank myself. Are there any explosion hazards or anything I should watch out for in terms of safety. Are LO2 tanks double walled, contain a dewar or contain any hazardous insulating material I should be careful of? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| DIY Heat Bank/Thermal Store system? (longish) | UK diy | |||
| Waterlogged well pressure tank | Home Repair | |||
| Help sizing a pressure tank | Home Repair | |||
| Initial fill of new Propane tank fact or fiction on purge needed | Metalworking | |||
| LP tank valve removal UPDATE | Metalworking | |||
Threaded Mode
