 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Taig Cross Slide Problem Fixed
I recently posted here about the cross slide problem where it was
binding. Therre is a brass nut that needed to be "worked in" It was really tight. The people at Taig were really helpfull with advice and offered to repair it if I couldn't fix it myself. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| this ought to get everybody fired up.... | Woodworking | |||
| 100mm extractor hood ducting problem | UK diy | |||
| Problem with retrace lines on EIZO F55S... | Electronics Repair | |||
| RCA tv 36" color problem | Electronics Repair | |||
| problem | Electronics Repair | |||
Threaded Mode
