Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Taig Cross Slide Problem Fixed
I recently posted here about the cross slide problem where it was
binding. Therre is a brass nut that needed to be "worked in" It was really tight. The people at Taig were really helpfull with advice and offered to repair it if I couldn't fix it myself. |
#2
|
|||
|
|||
"msterspy" wrote in message news I recently posted here about the cross slide problem where it was binding. Therre is a brass nut that needed to be "worked in" It was really tight. The people at Taig were really helpfull with advice and offered to repair it if I couldn't fix it myself. [Thanks for following up with the resolution to this. Often, one hears about people's problems and frustrations, but never gets "the rest of the story"...] Andrew Werby www.computersculpture.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
this ought to get everybody fired up.... | Woodworking | |||
100mm extractor hood ducting problem | UK diy | |||
Problem with retrace lines on EIZO F55S... | Electronics Repair | |||
RCA tv 36" color problem | Electronics Repair | |||
problem | Electronics Repair |