Home |
Search |
Today's Posts |
|
Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
nano size laser weld spot size for stainless steel sheets
sorry for not mentioning the dimensions
sheets r 100 micro meter and spot sizes needed are 50 micro meter plz remember the weld should have atleast 160 micrometer depth(for weld strength) ...open for any ideas |
#2
|
|||
|
|||
Sounds like you should talk to someone in the micro-chip industry. They
weld the connecting wire between the silicon chip and the connecting pins. I believe though, that the wire are gold not stainless. Tom "Venky" wrote in message oups.com... sorry for not mentioning the dimensions sheets r 100 micro meter and spot sizes needed are 50 micro meter plz remember the weld should have atleast 160 micrometer depth(for weld strength) ...open for any ideas |
#4
|
|||
|
|||
It's pretty amazing what you can do with e-beam welding, but it's a very
expensive process. OTOH, it would almost certainly work for this. -- Bob (Chief Pilot, White Knuckle Airways) "Venky" wrote in message oups.com... sorry for not mentioning the dimensions sheets r 100 micro meter and spot sizes needed are 50 micro meter plz remember the weld should have atleast 160 micrometer depth(for weld strength) ...open for any ideas |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
nano size laser spot welding for stainless steel | Metalworking | |||
Knife Steel FAQ updated | Metalworking |