nano size laser weld spot size for stainless steel sheets
sorry for not mentioning the dimensions
sheets r 100 micro meter and spot sizes needed are 50 micro meter plz remember the weld should have atleast 160 micrometer depth(for weld strength) ...open for any ideas |
Sounds like you should talk to someone in the micro-chip industry. They
weld the connecting wire between the silicon chip and the connecting pins. I believe though, that the wire are gold not stainless. Tom "Venky" wrote in message oups.com... sorry for not mentioning the dimensions sheets r 100 micro meter and spot sizes needed are 50 micro meter plz remember the weld should have atleast 160 micrometer depth(for weld strength) ...open for any ideas |
It's pretty amazing what you can do with e-beam welding, but it's a very
expensive process. OTOH, it would almost certainly work for this. -- Bob (Chief Pilot, White Knuckle Airways) "Venky" wrote in message oups.com... sorry for not mentioning the dimensions sheets r 100 micro meter and spot sizes needed are 50 micro meter plz remember the weld should have atleast 160 micrometer depth(for weld strength) ...open for any ideas |
All times are GMT +1. The time now is 07:47 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter