 |
|
| Metalworking (rec.crafts.metalworking) Discuss various aspects of working with metal, such as machining, welding, metal joining, screwing, casting, hardening/tempering, blacksmithing/forging, spinning and hammer work, sheet metal work. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Using Jacobs style chuck for workholding
Is it considered acceptable to hold work
with a Jacobs style chuck. Specifically, is it ok to put a piece of drill rod stock in the chuck, mount the chuck in a rotary table and then make cuts on the stock with my mill? |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Req: Info on Jacobs Chuck for Jet Mini Lathe Tailstock | Woodturning | |||
| problems w/ jacobs 900 series collet chuck, have questions - need answers | Metalworking | |||
| Teknatool Titan Chuck draft review | Woodturning | |||
| Looking for Jacobs 59B chuck key | Metalworking | |||
| Jacobs Chuck removal from 1/2in. drill | Metalworking | |||
Threaded Mode
